- No products in the cart.
Search Results for: free wheel
standard
Seismic – Fullspin 10mm Steel XT Built-In – Bearings
Seismic Skate – Fullspin 10mm Steel XT Built-In – Bearings
Fullspin™ 10mm Steel XT™ Bearings with Patented High-Precision Built-In Spacer System
Next-level skate bearing tech – more speed, better handling, longer life!
Fit standard 8mm axles only.
We spent over two years nerding out with a crack team of American engineers from one of the biggest and best bearing factories in the world, to raise the bar on bearing tech yet again! Roll tighter, truer, faster, and smarter on Fullspin: the absolute best skate bearings in the entire history of skate bearings!
THE BASICS
6-Ball system – Less total friction, better acceleration and speed on straightaways. Recommended for LDP and top-speed pursuits.
Premium Steel balls – Superior Grade G10 balls spin truer with less friction inside bearings.
Exceptionally tight, consistent assembly and raceway tolerances – Significantly less internal play, friction, wear, and noise. Superior speed, handling, and durability.
Extra-tough steel and thicker outer rings – Raceways hold strictest curvature and finest surface finish – and bearings stay tight and fast – for far longer. Thicker, 60%-stiffer outer rings resist flexing, spin truer and faster, and keep seals from popping off on extreme impacts. Coated with a strong rust-preventative agent, but more economically finished without the black oxide anti-corrosion surface treatment seen in premium Steel and Ceramic XT models.
Next-level patented Built-In spacing / alignment system – Built-in half-spacers with extra-wide flanged ends square up inside wheels with more than double the contact area of ordinary Built-In interfaces – powering absolutely unparalleled alignment precision and stability. System levels and steadies all working components of seated bearings far better than any other design (Built-In or Classic), to unleash near-perfectly optimized paired performance. Synergizes with all advanced features in individual bearings to maintain exceptionally consistent wheel contact and grip; support extremely predictable slide performance; and noticeably extend both wheel and bearing life.
High-end lubricant – Formulated for peak performance under real-world skating stresses (not max free-spin time).
Labyrinth-style outer seals – Edges of seals slot inside V-shaped grooves for maximum resistance to dust and debris.
Next-level anti-contaminant ball retainers – Expanded outer diameter slots into groove in outer ring just like a second seal, to form a unique integral barrier against dirt and grime.
We don’t bother with the ABEC rating system, which measures only the most superficial dimensional tolerances of the outer and inner rings – all of negligible relevance to real-world skating performance. Low-versus-high ABEC ratings have no direct correspondence with poor-versus excellent skating performance in the real world.
standard
Seismic – Fullspin 10mm Ceramic XT Built-In – Bearings
Seismic Skate – Fullspin 10mm Ceramic XT Built-In – Bearings
Fullspin™ 10mm Ceramic XT™ Bearings with Patented High-Precision Built-In Spacer System
Next-level skate bearing tech – more speed, better handling, longer life!
ONLY for extra-thick 10mm axles. Will not fit standard 8mm axles.
We spent over two years nerding out with a crack team of American engineers from one of the biggest and best bearing factories in the world, to raise the bar on bearing tech yet again! Roll tighter, truer, faster, and smarter on Fullspin: the absolute best skate bearings in the entire history of skate bearings!
THE BASICS
10MM system – Fits thicker 10mm axles only.
Premium Ceramic balls – Lighter, smoother, harder, lower in friction, self-lubricating, more heat-resistant, completely rustproof. Increased acceleration, speed, and durability versus Steel balls. Manufactured to superior Grade G10 spec for truer, lower-friction ball spin inside bearings.
Exceptionally tight, consistent assembly and raceway tolerances – Significantly less internal play, friction, wear, and noise. Superior speed, handling, and durability.
Extra-tough steel and thicker outer rings – Raceways hold strictest curvature and finest surface finish – and bearings stay tight and fast – for far longer. Thicker, 60%-stiffer outer rings resist flexing, spin truer and faster, and keep seals from popping off on extreme impacts. Coated with a strong rust-preventative agent, but more economically finished without the black oxide anti-corrosion surface treatment seen in premium Steel and Ceramic XT models.
Next-level patented Built-In spacing / alignment system – Built-in half-spacers with extra-wide flanged ends square up inside wheels with more than double the contact area of ordinary Built-In interfaces – powering absolutely unparalleled alignment precision and stability. System levels and steadies all working components of seated bearings far better than any other design (Built-In or Classic), to unleash near-perfectly optimized paired performance. Synergizes with all advanced features in individual bearings to maintain exceptionally consistent wheel contact and grip; support extremely predictable slide performance; and noticeably extend both wheel and bearing life.
High-end lubricant – Formulated for peak performance under real-world skating stresses (not max free-spin time).
Labyrinth-style outer seals – Edges of seals slot inside V-shaped grooves for maximum resistance to dust and debris.
Next-level anti-contaminant ball retainers – Expanded outer diameter slots into groove in outer ring just like a second seal, to form a unique integral barrier against dirt and grime.
We don’t bother with the ABEC rating system, which measures only the most superficial dimensional tolerances of the outer and inner rings – all of negligible relevance to real-world skating performance. Low-versus-high ABEC ratings have no direct correspondence with poor-versus excellent skating performance in the real world.
standard
Seismic – Fullspin 6-Ball Steel XT Built-In – Bearings
Seismic Skate – Fullspin 6-Ball Steel XT Built-In – Bearings
Fullspin™ 6-Ball Steel XT™ Bearings with Patented High-Precision Built-In Spacer System
Next-level skate bearing tech – more speed, better handling, longer life!
Fit standard 8mm axles only.
We spent over two years nerding out with a crack team of American engineers from one of the biggest and best bearing factories in the world, to raise the bar on bearing tech yet again! Roll tighter, truer, faster, and smarter on Fullspin: the absolute best skate bearings in the entire history of skate bearings!
THE BASICS
6-Ball system – Less total friction, better acceleration and speed on straightaways. Recommended for LDP and top-speed pursuits.
Premium Steel balls – Superior Grade G10 balls spin truer with less friction inside bearings.
Exceptionally tight, consistent assembly and raceway tolerances – Significantly less internal play, friction, wear, and noise. Superior speed, handling, and durability.
Extra-tough steel and thicker outer rings – Raceways hold strictest curvature and finest surface finish – and bearings stay tight and fast – for far longer. Thicker, 60%-stiffer outer rings resist flexing, spin truer and faster, and keep seals from popping off on extreme impacts. Coated with a strong rust-preventative agent, but more economically finished without the black oxide anti-corrosion surface treatment seen in premium Steel and Ceramic XT models.
Next-level patented Built-In spacing / alignment system – Built-in half-spacers with extra-wide flanged ends square up inside wheels with more than double the contact area of ordinary Built-In interfaces – powering absolutely unparalleled alignment precision and stability. System levels and steadies all working components of seated bearings far better than any other design (Built-In or Classic), to unleash near-perfectly optimized paired performance. Synergizes with all advanced features in individual bearings to maintain exceptionally consistent wheel contact and grip; support extremely predictable slide performance; and noticeably extend both wheel and bearing life.
High-end lubricant – Formulated for peak performance under real-world skating stresses (not max free-spin time).
Labyrinth-style outer seals – Edges of seals slot inside V-shaped grooves for maximum resistance to dust and debris.
Next-level anti-contaminant ball retainers – Expanded outer diameter slots into groove in outer ring just like a second seal, to form a unique integral barrier against dirt and grime.
We don’t bother with the ABEC rating system, which measures only the most superficial dimensional tolerances of the outer and inner rings – all of negligible relevance to real-world skating performance. Low-versus-high ABEC ratings have no direct correspondence with poor-versus excellent skating performance in the real world.
standard
Seismic – Fullspin 6-Ball Ceramic XT Built-In – Bearings
Seismic Skate – Fullspin 6-Ball Ceramic XT Built-In – Bearings
Fullspin™ 6-Ball Ceramic XT™ Bearings with Patented High-Precision Built-In Spacer System
Next-level skate bearing tech – more speed, better handling, longer life!
Fit standard 8mm axles only.
We spent over two years nerding out with a crack team of American engineers from one of the biggest and best bearing factories in the world, to raise the bar on bearing tech yet again! Roll tighter, truer, faster, and smarter on Fullspin: the absolute best skate bearings in the entire history of skate bearings!
THE BASICS
6-Ball system – Less total friction, better acceleration and speed on straightaways. Recommended for LDP and top-speed pursuits.
Premium Ceramic balls – Lighter, smoother, harder, lower in friction, self-lubricating, more heat-resistant, completely rustproof. Increased acceleration, speed, and durability versus Steel balls. Manufactured to superior Grade G10 spec for truer, lower-friction ball spin inside bearings.
Exceptionally tight, consistent assembly and raceway tolerances – Significantly less internal play, friction, wear, and noise. Superior speed, handling, and durability.
Extra-tough steel and thicker outer rings – Raceways hold strictest curvature and finest surface finish – and bearings stay tight and fast – for far longer. Thicker, 60%-stiffer outer rings resist flexing, spin truer and faster, and keep seals from popping off on extreme impacts. Coated with a strong rust-preventative agent, but more economically finished without the black oxide anti-corrosion surface treatment seen in premium Steel and Ceramic XT models.
Next-level patented Built-In spacing / alignment system – Built-in half-spacers with extra-wide flanged ends square up inside wheels with more than double the contact area of ordinary Built-In interfaces – powering absolutely unparalleled alignment precision and stability. System levels and steadies all working components of seated bearings far better than any other design (Built-In or Classic), to unleash near-perfectly optimized paired performance. Synergizes with all advanced features in individual bearings to maintain exceptionally consistent wheel contact and grip; support extremely predictable slide performance; and noticeably extend both wheel and bearing life.
High-end lubricant – Formulated for peak performance under real-world skating stresses (not max free-spin time).
Labyrinth-style outer seals – Edges of seals slot inside V-shaped grooves for maximum resistance to dust and debris.
Next-level anti-contaminant ball retainers – Expanded outer diameter slots into groove in outer ring just like a second seal, to form a unique integral barrier against dirt and grime.
We don’t bother with the ABEC rating system, which measures only the most superficial dimensional tolerances of the outer and inner rings – all of negligible relevance to real-world skating performance. Low-versus-high ABEC ratings have no direct correspondence with poor-versus excellent skating performance in the real world.
standard
Seismic – Fullspin 7-Ball Ceramic XT Built-In – Bearings
Seismic Skate – Fullspin 7-Ball Ceramic XT Built-In – Bearings
Fullspin™ 7-Ball Ceramic XT™ Bearings with Patented High-Precision Built-In Spacer System
Next-level skate bearing tech – more speed, better handling, longer life!
Fit standard 8mm axles only.
We spent over two years nerding out with a crack team of American engineers from one of the biggest and best bearing factories in the world, to raise the bar on bearing tech yet again! Roll tighter, truer, faster, and smarter on Fullspin: the absolute best skate bearings in the entire history of skate bearings!
THE BASICS
7-Ball system – Best overall balance of speed and resistance to frequent impacts and side loads. Recommended for high-speed turning / sliding and all style / trick disciplines.
Premium Ceramic balls – Lighter, smoother, harder, lower in friction, self-lubricating, more heat-resistant, completely rustproof. Increased acceleration, speed, and durability versus Steel balls. Manufactured to superior Grade G10 spec for truer, lower-friction ball spin inside bearings.
Exceptionally tight, consistent assembly and raceway tolerances – Significantly less internal play, friction, wear, and noise. Superior speed, handling, and durability.
Extra-tough steel and thicker outer rings – Raceways hold strictest curvature and finest surface finish – and bearings stay tight and fast – for far longer. Thicker, 60%-stiffer outer rings resist flexing, spin truer and faster, and keep seals from popping off on extreme impacts. Coated with a strong rust-preventative agent, but more economically finished without the black oxide anti-corrosion surface treatment seen in premium Steel and Ceramic XT models.
Next-level patented Built-In spacing / alignment system – Built-in half-spacers with extra-wide flanged ends square up inside wheels with more than double the contact area of ordinary Built-In interfaces – powering absolutely unparalleled alignment precision and stability. System levels and steadies all working components of seated bearings far better than any other design (Built-In or Classic), to unleash near-perfectly optimized paired performance. Synergizes with all advanced features in individual bearings to maintain exceptionally consistent wheel contact and grip; support extremely predictable slide performance; and noticeably extend both wheel and bearing life.
High-end lubricant – Formulated for peak performance under real-world skating stresses (not max free-spin time).
Labyrinth-style outer seals – Edges of seals slot inside V-shaped grooves for maximum resistance to dust and debris.
Next-level anti-contaminant ball retainers – Expanded outer diameter slots into groove in outer ring just like a second seal, to form a unique integral barrier against dirt and grime.
We don’t bother with the ABEC rating system, which measures only the most superficial dimensional tolerances of the outer and inner rings – all of negligible relevance to real-world skating performance. Low-versus-high ABEC ratings have no direct correspondence with poor-versus excellent skating performance in the real world.
standard
Seismic – Fullspin 7-Ball Steel XT Built-In – Bearings
Seismic Skate – Fullspin 7-Ball Steel XT Built-In – Bearings
Fullspin™ 7-Ball Steel XT™ Bearings with Patented High-Precision Built-In Spacer System
Next-level skate bearing tech – more speed, better handling, longer life!
Fit standard 8mm axles only.
We spent over two years nerding out with a crack team of American engineers from one of the biggest and best bearing factories in the world, to raise the bar on bearing tech yet again! Roll tighter, truer, faster, and smarter on Fullspin: the absolute best skate bearings in the entire history of skate bearings!
THE BASICS
7-Ball system – Best overall balance of speed and resistance to frequent impacts and side loads. Recommended for high-speed turning / sliding and all style / trick disciplines.
Premium Steel balls – Superior Grade G10 balls spin truer with less friction inside bearings.
Exceptionally tight, consistent assembly and raceway tolerances – Significantly less internal play, friction, wear, and noise. Superior speed, handling, and durability.
Extra-tough steel and thicker outer rings – Raceways hold strictest curvature and finest surface finish – and bearings stay tight and fast – for far longer. Thicker, 60%-stiffer outer rings resist flexing, spin truer and faster, and keep seals from popping off on extreme impacts. Coated with a strong rust-preventative agent, but more economically finished without the black oxide anti-corrosion surface treatment seen in premium Steel and Ceramic XT models.
Next-level patented Built-In spacing / alignment system – Built-in half-spacers with extra-wide flanged ends square up inside wheels with more than double the contact area of ordinary Built-In interfaces – powering absolutely unparalleled alignment precision and stability. System levels and steadies all working components of seated bearings far better than any other design (Built-In or Classic), to unleash near-perfectly optimized paired performance. Synergizes with all advanced features in individual bearings to maintain exceptionally consistent wheel contact and grip; support extremely predictable slide performance; and noticeably extend both wheel and bearing life.
High-end lubricant – Formulated for peak performance under real-world skating stresses (not max free-spin time).
Labyrinth-style outer seals – Edges of seals slot inside V-shaped grooves for maximum resistance to dust and debris.
Next-level anti-contaminant ball retainers – Expanded outer diameter slots into groove in outer ring just like a second seal, to form a unique integral barrier against dirt and grime.
We don’t bother with the ABEC rating system, which measures only the most superficial dimensional tolerances of the outer and inner rings – all of negligible relevance to real-world skating performance. Low-versus-high ABEC ratings have no direct correspondence with poor-versus excellent skating performance in the real world.
standard
Seismic – Fullspin 7-Ball Steel LITE Built-In – Bearings
Seismic Skate – Fullspin 7-Ball Steel LITE Built-In Bearings
Fullspin™ 7-Ball LITE Bearings with High-Precision Built-In Spacer System
A streamlined, more affordable version of our patented Fullspin 7-Ball Steel XT Built-In bearing design
Next-level skate bearing tech – more speed, better handling, longer life!
Fit standard 8mm axles only.
We spent over two years nerding out with a crack team of American engineers from one of the biggest and best bearing factories in the world, to raise the bar on bearing tech yet again! Roll tighter, truer, faster, and smarter on Fullspin: the absolute best skate bearings in the entire history of skate bearings!
THE BASICS
7-Ball system – Best overall balance of speed and resistance to frequent impacts and side loads. Recommended for high-speed turning / sliding and all style / trick disciplines.
Premium Steel balls – Superior Grade G10 balls spin truer with less friction inside bearings.
Exceptionally tight, consistent assembly and raceway tolerances – Significantly less internal play, friction, wear, and noise. Superior speed, handling, and durability.
Extra-tough steel and thicker outer rings – Raceways hold strictest curvature and finest surface finish – and bearings stay tight and fast – for far longer. Thicker, 60%-stiffer outer rings resist flexing, spin truer and faster, and keep seals from popping off on extreme impacts. Coated with a strong rust-preventative agent, but more economically finished without the black oxide anti-corrosion surface treatment seen in premium Steel and Ceramic XT models.
State-of-the-art Built-In spacing / alignment system – A more affordable design without Fullspin’s patented Built-In flange tech (seen in Steel and Ceramic XT models), but still superior to Built-In systems from other brands. Integral half-spacers with smarter, stricter dimensional specs square up inside wheels with outstanding precision and stability. System levels and steadies all working components of seated bearings to unlock truly exceptional paired performance. Synergizes with all advanced features in individual bearings to maintain extremely consistent wheel contact and grip; support highly predictable slide performance; and noticeably extend both wheel and bearing life.
High-end lubricant – Formulated for peak performance under real-world skating stresses (not max free-spin time).
Labyrinth-style outer seals – Edges of seals slot inside V-shaped grooves for maximum resistance to dust and debris.
Next-level anti-contaminant ball retainers – Expanded outer diameter slots into groove in outer ring just like a second seal, to form a unique integral barrier against dirt and grime.
We don’t bother with the ABEC rating system, which measures only the most superficial dimensional tolerances of the outer and inner rings – all of negligible relevance to real-world skating performance. Low-versus-high ABEC ratings have no direct correspondence with poor-versus excellent skating performance in the real world.
standard
Landyachtz – Stratus 46 Texture Flow – Deck
Landyachtz Longboards – Stratus 46 Texture Flow – Dance Freestyle Deck
** DECK ONLY
The Stratus is one of the most functional and versatile boards in our lineup. Designed for dancing, the long wheelbase and subtle flex create a board well suited to freestyle tricks, long cruises, carving, sliding, bombing, popping those ollies and all out vibing. The board is fully symmetrical, so no matter which way it hits the ground, you can continue getting’ jiggy. it is a fantastic tool for experts to push their boundaries and hone their skills.
The Stratus 46 is a flexy longboard shape designed specifically for freestyle and longboard dancing. At 45.5″ long by 9.25″ wide, with griptape only where you need it, this board has plenty of space for all of your cross-stepping needs. The Stratus uses an 8 ply Canadian Maple construction to give a nice medium flex feel that returns lots of energy out of each turn but still gives you a confident feeling when landing tricks.
Details
Length: 45.5″
Width: 9.25″
Wheelbase: 27.5″ – 29.5″
standard
Landyachtz – Tony Danza Texture Flow Stratus 40 – Deck
Landyachtz Longboards – Tony Danza Texture Flow Stratus 40 – Dance Freestyle Deck
** DECK ONLY
The Tony Danza is the newest addition to our dance lineup and it features a significantly narrower platform designed around our new 155mm Grizzly Gen 6 trucks. This board is perfectly suited to riders who are looking for a board that will flip faster and with less effort than a wider dancing board.
The Tony Danza is a flexy longboard shape designed specifically for freestyle and longboard dancing. At 39.9″ long by 8.5″ wide and with griptape only where you need it, this board is perfectly suited to riders who are looking for a board that will flip faster and with less effort than a wider dancing board. A favourite of team riders like Carla Javier-Brea, this board opens up a lot of technical possibilities due to its light weight and compact size. The Tony Danza uses a 7 ply Canadian Maple construction to give a nice medium flex feel that returns lots of energy out of each turn but still gives you a confident feeling when landing tricks. The narrow width and short wheelbase also make technical tricks more accessible to shorter riders or people with smaller feet. This is the perfect board to introduce younger kids to the world of freestyle and dancing.
Details
Length: 39.9″
Width: 8.5″
Wheelbase: 22.75″ – 24.63″
standard
Landyachtz – Drop Cat 33 Journey – Deck
Landyachtz Longboards – Drop Cat 33 Journey – Deck
** DECK ONLY
With a board as wild as this, we thought it deserved a wild graphic as well. The art seen here originated in the mind of Alejandro Sordi who really knocked it out of the park. The graphic isn’t the only trick this board has up its sleeve though, it also has an extremely unique shape, tons of rocker and a super low drop-through design for the ultimate longboard experience. The Drop Cat 33 is perfect for smaller riders or anyone looking for a more agile ride. Take a journey on the Drop Cat 33.
Details
Length: 33″
Width: 9.625
Wheelbase: 23.9″
Bear Gen 6 180mm 50 degree
Hawgs 72mm 78a Plow King
Spaceballs
This compact, directional drop-through longboard comes in at 33″ long by 9.625″ wide. 7 ply construction in a board this small results in a tiny amount of dampening flex which works to smooth out your ride on any rougher roads while still being stiff enough to handle some speed and sliding. This board also has a healthy dose of rocker and aggressive, flared concave to keep your feet comfortable and locked in place while freeriding. You will notice the flares starting to rise as your foot nears the four corners of the standing platform, which gives you great reference points, so you know exactly where your feet are without looking down. The short wheelbase provides a small turning circle which, combined with the rocker, gives an incredibly responsive feel which is ideal for low speed and powerful carves. The Drop Cat comes equipped with our flagship 50-degree 180mm grizzly Gen 6 trucks ideal for deep carves and confident cruising as well as some big 72mm 78a Plow King wheels for a smooth, fast and super grippy ride.