- No products in the cart.
POWELL PERALTA – RIB BONES
$24.99CADThe original Powell Peralta Rib Bones skateboard slide rail. Easy to install, great sliding, and long lasting. 14.” UHMW polyethylene. Long Screws Included.
Original Rib Bones shape.
2 rails, predrilled with mounting screws.
14.5″ long.
We suggest to put a #6 flat washer between the screw and Rib Bones if installing on a Flight deck.
Independent – Best Skate Tool
$37.99CADOfficially licensed and patented design—The Best Skate Tool features 9/16”, 1/2”, and 3/8” sockets, 7/32” & 1/8” allen wrenches, #2 phillips driver, a bearing press / puller, and 5/16” axle re-threader. Its seriously the only tool you’ll ever need.
ACCEPT NO SUBSTITUTES
Khiro – Aluminum Insert Cones – Bushings
$10.99$5.99CADKhiro Bushings – Aluminum Insert – For One Truck
Khiro Aluminum Insert Bushings are designed for fast rebound, quick snap back, “NO BLOW OUTS” on these bushings. One tall cone and one short cone with engineered aluminum inserts, compounded with a special grade urethane moves these bushings way out front.
Dimensions:
small cone height = .375″
large cone height = .50″Original Durometers (Limited Stock):
White X-Soft (73a)
Orange (79a)
Blue Soft (85a)
Red Med-Soft (90a)
Yellow Med-Hard (92a)
Black Hard (95a)
Purple (98a)Sold in set of two bushings – (top and bottom) enough for one truck.
Rogers Bros – Foot Braking Sole
$19.99CADDid you do a little too much foot breaking? Are your shoes still nice except the sole has it got a big hole in it?
This is the solution!Foot brake soles fit both left and right shoes and fit all sizes. They are made oversized and need to be cut down to the shape and size of your shoe. All soles are applied to shoes using shoe goo.
Sold individually, they are made up of recycled rubber, and come uncut in a rectangle 13″ x 4.75″.
The V1 soles are are 0.25″ thick, and the V2 soles come in two thicknesses of 0.125″ and 0.187″ depending on how much board feel and durability you are looking for. The V2 soles last longer than the V1 soles, but both will slow you down faster than your average shoe sole!
Rogers Bros – 1.25in & 1.5in Bridge Bolts – Mounting Hardware
$29.99CADRogers Bros Precision Truck Mounting Hardware Bridge Bolts
Rogers Bros Hardware will hold your trucks on straighter, last longer, and don’t require a phillips or allan key to install or tighten. This hardware will last you through several set ups!
Stays put. No BS.
Truck Mounting Hardware (mounts 2 tucks) :Say goodbye to screwdrivers and hex keys when mounting your trucks. “Dogbone” shape spreads the load from the fasteners to a larger area to reduce deforming/splitting your deck around the mounting holes. Trucks go on straighter and truer due to precise dimensions and tolerances. 6061-T6 Aluminum with high strength steel studs.
Specifications
1.25” Hardware set
1.5” Hardware setComes with enough for one complete board.
Rogers Bros – Original Aluminum Foot Stop
$39.99CADRogers Bros – Original Aluminum Downhill Skateboarding Foot Stop
“Adjusts for goofy or regular. Adjustable angle concave contact surface. 6061-T6 Aluminum. This was the industry’s first footstop produced specifically for downhill bombers in 2008. – Rogers Bros”
Specifications:
- Inward wing is 5.25″ long
- Sits .75″ above the top of your board
Bronson Speed Co. – Raw – Bearings
$74.99CADBronson Speed Co – Raw – Bearings
Designed for skaters who demand peak performance, RAW Bearings from Bronson Speed Co. deliver an ultra-fast, ultra-smooth ride built to handle the toughest sessions.
Deep Groove Raceways: Helps prevent impact damage so your bearings last longer.
Max Impact Cage: Keeps everything perfectly spaced for top performance and durability.
High-Speed Oil: Specially formulated to resist water, oxidation, and corrosion, keeping your bearings fresh and fast.
Factory Fresh, Ready to Rip
Race Ready: Each set is nitrogen-sealed to prevent oxidation, ensuring they’re ready the moment you pop them in.
Rogers Bros – Max Capps Dagger Foot Stop
$39.99CADWe love Max Capps, and we love Roger Bros. Thankfully through the will of the skate gods they have some together to give us this incredible piece of skate hardware. If you’re having issues with your foot slipping off and it needs a little regulation than stick this bad boy on there…problem solved!
“DAGGERS RULE”
- On Sale
Khiro – Standard Cone / Barrel – Bushings
$9.99$4.99CADThe Khiro Bushing Replacement Packs were made to replace the bushings in just about any truck on the planet. By installing any one of these kits in your trucks, you will be sure to experience Khiro’s incredible ‘Full Cushion’.
The Khiro ‘Standard’ Bushings come in seven different durometers; Extra Soft White 73A, Mild Soft Orange 79A, Soft Blue 85A, Med Soft Red 90A, Hard Black 95A and Extra Hard Purple 98A.
Note: The X-Soft White Bushings are 73-A hardness, designed for light discipline and lightweight skaters.
- On Sale
Khiro – Tall Cone – Bushings
$9.99$4.99CADKhiro Bushings – Tall Cone Skateboard Bushing Pair (for one truck)
The Tall Cone Bushings are produced out of the same top grade urethane with familiar duros and colors the Khiro line is known for. Taller cone design made to fit trucks such as Randal, Paris and more. For best fit, check the measurements of your existing truck bushings and decide accordingly.
Dimensions:
small cone height = .510″
large cone height = .650″Original Durometers (Limited Stock):
White X-Soft (73a)
Orange (79a)
Blue Soft (85a)
Red Med-Soft (90a)
Yellow Med-Hard (92a)
Black Hard (95a)
Purple (98a)Sold in set of two bushings – (top and bottom) enough for one truck.
Bronson Speed Co. – G3 – Bearings
$46.99CADBronson Speed Co. – G3 – Bearings
Bronson Speed Co. G3 Bearings – Built for Speed, Strength & Maximum Performance. Designed for the relentless demands of modern skateboarding, Bronson Speed Co. G3 Bearings deliver faster speeds, smoother rides, and unmatched durability, so you can push harder and roll longer.
Specifications:
Impact-Resistant Deep Groove Raceways: Balls sit deeper in the channels to absorb heavy impacts, reducing damage and extending bearing life.
Frictionless, Easy-Clean Shields: Pop-off-resistant shields keep dirt and moisture out while locking oil inso your bearings stay cleaner, faster, and require less maintenance.
Enhanced Lubrication & Speed: Micro-groove raceways improve oil circulation, reducing friction for a smoother, faster, and more consistent ride.
Max Impact Cage for Long-Lasting Performance: A reinforced, non-distorting cage keeps balls perfectly spaced while micro-grooves aid in oil flow, maximizing speed and durability.
Balls Out Technology: Go Fast, Stay Fast – Eliminates shield and cage contact on impact, ensuring uninterrupted speed through every session.
High-Speed Oil for Extended Life: Custom-engineered lubricant resists water, oxidation, and corrosion, keeping your bearings rolling fresh for longer.
Factory-Fresh & Ready to Ride: Nitrogen-filled shrink wrap prevents oil and metal oxidation, so your bearings stay in peak condition until you’re ready to rip.Each set includes 8 precision bearings, 4 spacers, and 8 axle washers – everything you need for a smoother, stronger, and longer-lasting ride.
Bronson Speed Co. – G2 – Bearings
$28.99CADBronson Speed Co. – G2 – Bearings
Bronson Speed Co. G2 Bearings are Built for Speed, Strength & Longevity. Designed for the demands of modern skateboarding, Bronson Speed Co. G2 Bearings deliver a smoother, faster, and more durable ride, session after session.
Specifications:
Impact-Resistant Deep Groove Raceways: Keeps the balls rolling deep in the channels, reducing damage from harsh landings and increasing bearing lifespan.
Frictionless, Easy-Clean Shields: Pop-off-resistant shields keep dirt and moisture out while locking oil in – ensuring less maintenance and maximum speed.
High-Speed Oil for Longer Life: A specially engineered lubricant protects against water, oxidation, and corrosion, so your bearings stay fresh and fast for longer.
Each set includes 8 precision bearings, 4 spacers, and 8 axle washers, everything you need for a smoother, stronger, and longer-lasting ride.
Orangatang – Moose Knuckles Bushings
$26.99CADJUICIER BOUNCE, TIGHTER PACKAGE.
Crafted for quick turning response and smooth edge-to-edge transitions, Orangatang Knuckles are the ultimate high-energy bushing upgrade for carving, pumping, dancing, and freestyle longboarding.Orange = Soft
Purple = MediumWhat’s in the box? Pack contains two insert barrel bushings, two gumdrop bushings, two large cup washers, and two small cup washers.
LONGBOARD BUSHING SPECS
Diameter: 0.95” (24.1 mm)
Height (gumdrop): 0.64” (16.3 mm)
Height (inset barrel) 0.59” (15 mm) barrel + 0.075” (1.91 mm) insert = 0.665” (16.9 mm) total
Formula: Randy Thane
Durometers: soft (orange, 87a), medium (purple, 90a)RECOMMENDED WEIGHT RANGES
Soft: 65-190+ lbs / 29-86+ kg
Medium: 130-230+ lbs / 59-104+ kg
Orangatang – Nipples Bushings
$26.99CADIs it cold in here or are you just sporting some perky bushings? Stuff these chubby puppies into your trucks and get ready to bounce out of every carve with tons of energy and rebound. Poured with our extra lively and energetic Randy Urethane, which we came upon while testing wheels but had slide characteristics that were a bit hmmmmm . . . premature? Too eager for a wheel, but just excitable enough to squeeze between your washers.
Sold as a set of four (4), including four thin and strong flat washers. Nipples are NOT recommended for every truck on the market, but they do work well with Paris, Tracker Fastracks and Randals (among others).
Bones – Race Reds Precision Built In – Bearings
$54.99CADPrecision ground, Skate Rated™ Racing bearings by Bones®
Removable high-speed Nylon™ ball retainers
Removable Non-Contact frictionless shield for easy cleaning
Integrated bearing spacer to provide perfect 0.400″ spacing
Extended race replaces need for spacers and washers
Extended race provides perfect alignment for greater speed and axle reinforcement
Fewer parts mean faster set up
