Venom – Bushings – Barrical Freeride (HPF)
$14.99CADVenom – Bushings – Barrical Freeride (HPF)
More stable than a barrel and less restrictive than an Eliminator, the Venom freeride bushing has a wide, stepped design that can be flipped for different turning response. For extra stability and a more defined center, put the wide end toward the hangar. For deep turning and juicy rebound, run the narrower end in the hangar. Either way, it’s ideal for going fast and doing big slides.
Made In USA
HPF Formula:
78A – Blue
81A – Orange
85A – Yellow
87A – Purple
90A – Red
93A – Green
95A – Glow in the Dark
97A – PinkDIMENSIONS:
Height: ~15.50mm
Step Diameter (into bushing seat): ~25.30mm
Max Diameter (out of bushing seat): ~30mm
Inner Diameter: ~9.50mmRiptide – Charger I Pivot Cups – 96a
$16.99CADRiptide – Charger I Pivot Cups – 96a
Sold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aLoaded – Counter Sunk – Hardware
$9.99CADLoaded – Counter Sunk – Hardware
Got that sinking feeling again? We’ll only make it worse. Loaded countersunk (flat head) hardware. The strongest bolts in the world. Period.
Based on research into steel technology and tons of testing, we’ve built the strongest bolts ever. These things don’t break. Guaranteed.
We’ve got little bumps (debossed or embossed, we’re not sure which is which) on top to further stick you to your deck. Guaranteed to smell like grease.
Our hardware comes with a hex key and is available in three sizes!
1”
1.25”
1.5″What’s in the box? 8 bolts, 8 nuts, and a wrench.
Packaging may vary.
Loaded – Button Head – Hardware
$9.99CADLoaded – Button Head – Hardware
The strongest bolts in the world. Period.
Based on research into steel technology and tons of testing, we’ve built the strongest bolts ever. These things don’t break. Guaranteed.
These button head bolts integrate the washer into the bolt itself in order to reduce the height of the bolt heads while still distributing load pressure.
Our hardware comes with a hex key and is available in three sizes!
1”
1.25”
1.5″
What’s in the box? 8 bolts, 8 nuts, and a hex key to tighten them down.Packaging may vary.
Seismic – Defcon Standard .75 Tall Barrel – Bushings
$17.99CADSeismic Skate – Defcon Standard Tall Barrel 0.75-inch (19mm) – Bushings
Seismic® Defcon™ Barrel Bushings
Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.A major step forward in bushing performance…
• Deeper lean and truer, more fluid steering with less lateral hanger slop!
• Highly-energetic yet smooth and controlled return-to-center
• Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
• Smoother, more linear resistance profile – Consistent feel • Advanced controlFine-tuned dimensions for high-performance fit!
• Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
• Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
• Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
• Tall 0.75-inch (19mm): Optimal height for most specialty race trucks. May fit and perform best without bottom / boardside washer (usually not needed).73A – Cloud White
77A – Sunray
81A – Sky Blue
84A – Bubblegum
87A – Mango
90A – Mint
93A – Grape
97A – MidnightNote: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.
Seismic – Defcon Standard .75 Tall Barrel Bushings – Bundle Pack
$79.99CADSeismic Skate – Defcon Standard Tall Barrel 0.75-inch (19mm) Bushings – Bundle Pack
Seismic® Defcon™ Barrel Bushings
Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.A major step forward in bushing performance…
• Deeper lean and truer, more fluid steering with less lateral hanger slop!
• Highly-energetic yet smooth and controlled return-to-center
• Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
• Smoother, more linear resistance profile – Consistent feel • Advanced controlFine-tuned dimensions for high-performance fit!
• Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
• Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
• Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
• Tall 0.75-inch (19mm): Optimal height for most specialty race trucks. May fit and perform best without bottom / boardside washer (usually not needed).Includes:
81A – Sky Blue
84A – Bubblegum
87A – Mango
90A – Mint
93A – GrapeNote: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.
Seismic – Defcon Standard Medium Barrel Bushings – Bundle Pack
$69.99CADSeismic Skate – Defcon Standard Medium Barrel 0.65-inch (16.5mm) Bushings – Bundle Pack
Seismic® Defcon™ Barrel Bushings
Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.A major step forward in bushing performance…
• Deeper lean and truer, more fluid steering with less lateral hanger slop!
• Highly-energetic yet smooth and controlled return-to-center
• Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
• Smoother, more linear resistance profile – Consistent feel • Advanced controlFine-tuned dimensions for high-performance fit!
• Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
• Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
• Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
• Medium 0.65-inch (16.5mm): Optimal height for most modern longboard trucks. May fit and perform best without bottom / boardside washer (usually not needed).Includes:
81A – Sky Blue
84A – Bubblegum
87A – Mango
90A – Mint
93A – GrapeNote: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.
Seismic – Defcon Standard .65 Medium Barrel – Bushings
$15.99CADSeismic Skate – Defcon Standard Medium Barrel 0.65-inch (16.5mm) – Bushings
Seismic® Defcon™ Barrel Bushings
Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
Available in five (5) color-coded durometers and two (2) precision-fit heights. (Additional duros coming early 2023.)
Price is for a single pair of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.A major step forward in bushing performance…
• Deeper lean and truer, more fluid steering with less lateral hanger slop!
• Highly-energetic yet smooth and controlled return-to-center
• Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
• Smoother, more linear resistance profile – Consistent feel • Advanced controlFine-tuned dimensions for high-performance fit!
• Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
• Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
• Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
• Medium 0.65-inch (16.5mm): Optimal height for most modern longboard trucks. May fit and perform best without bottom / boardside washer (usually not needed).73A – Cloud White
77A – Sunray
81A – Sky Blue
84A – Bubblegum
87A – Mango
90A – Mint
93A – Grape
97A – MidnightNote: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.
Seismic – Split Angled Wedges – Risers
$21.99CADSeismic Skate – Split Angled Wedges – Truck Risers
Precision-Machined • Ultra-Low Profile • Easy to Stack!
Package of one (1) 3-degree Riser and one (1) 7-degree Riser.
Packaged in pairs of one (1) 3-degree Riser and one (1) 7-degree Riser, with an advanced feature set never before seen in combination…
• Thin ends reduced to 0.5mm-thickness for lowest-possible profile.
• Mounting hole dimensions highly optimized for easy stacking. No more bent bolts from riser hole misalignment!*
• Biomimetic “honeycomb” structure maximizes support with minimal material.
• CNC-machined from tough composite with superior dimensional stability. Highly resistant to deformation from extreme loads and impacts.88 Wheel Co – Gummies Barrel Bushings Belligerent Blackberry Hard – 95A
$13.99CAD88 Wheel Co – Gummies Barrel Bushings Belligerent Blackberry Hard – 95A
Sold in packs of two so you can mix and match durometer for your perfectly tuned setup. Comes with 2 flat washers.
Diameter – 25mm
Height – 15mm
Durometer – 95A Super High Rebound
Weight – 27.4g / 0.97oz88 Wheel Co – Gummies Barrel Bushings Lucid Lemon Medium – 90A
$13.99CAD88 Wheel Co – Gummies Barrel Bushings Lucid Lemon Medium – 90A
Sold in packs of two so you can mix and match durometer for your perfectly tuned setup. Comes with 2 flat washers.
Diameter – 25mm
Height – 15mm
Durometer – 90A Super High Rebound
Weight – 27.4g / 0.97oz88 Wheel Co – Gummies Barrel Bushings Wavy Watermelon Super Soft – 80A
$13.99CAD88 Wheel Co – Gummies Double Barrel Bushings Wavy Watermelon (Super Soft) – 80A
Sold in packs of two so you can mix and match durometer for your perfectly tuned setup. Comes with 2 flat washers.
Diameter – 25mm
Height – 15mm
Durometer – 80A Super High Rebound
Weight – 27.4g / 0.97ozRiptide – Slab – Footstop
$31.99CADRiptide Footstop SLAB Urethane Downhill Longboarding Toestop
Riptide SLAB Custom 60d Urethane Longboard footstops are light weight, durable, and come with 3 Delrin disks so that you can customize both the angle and the height to your personal fit. Riptide Slab foot stop developed jointly with Ambroise Trauet (record holder for the fastest toeside stand up slide in the world with 117.35Km/h). Currently available in Black, Purple, Wine Red, Orange, Green, Pink, Yellow, Blue.
Individually sold and includes –
⦁ SLAB Footstop
⦁ Three (3) Delrin disks to adjust height and angle
⦁ Tiny washer
⦁ 1.75″ Bolt & Nut
⦁ Custom 60d Urethane
⦁ Durable
⦁ Height 1.3″
⦁ Width 2.75″
⦁ Lightweight 1.6 oz / 46 gmThe longer bolt and 3 delrin disks allow you to edit the height of the footstop off your board for foot comfort.
Boa – Black Belly Ceramic – Bearings
$99.99CADBoa Wheels – Black Belly Ceramic – Skateboard Bearings
The Boa Blackbelly Ceramic Bearings are the last set of bearings you’ll ever need to buy. We are so confident you’ll love them that we back them up with a lifetime warranty.
Featuring ultra strong silicon nitride ceramic balls that will resist corrosion and shattering for a lifetime of usage. The bearing housing is made of a corrosion treated steel and features rubber seals to keep moisture and dirt out. Each bearing is filled with a nano ceramic grease that helps keep the bearings running at their optimum.
With inbuilt spacers and speed rings, you won’t have to worry about losing them ever again, or messing with alignment of your spacers.
Pepper Grip – Alphanumeric Custom Griptape Kit
$28.99CADPepper Alphanumeric Custom Griptape Kit
Over 170 characters that allow you to customize your grip. Use in addition to a sheet of grip to make this custom kit cover multiple boards. 3 laser die cut sheets allow you to mix and match creating your own custom design. High adhesive letters don’t fall off when skated. Retains standard board feel when applied even with small gaps between the letters.
Pepper Grip Tape Alphanumeric pack
3 laser cut die sheets 11″ x 9″ each
over 170 characters to customize your grip
Use in addition to a sheet of grip to make this custom kit cover multiple boards.
Mix and match creating your own custom design.
High adhesive letters don’t fall off when skated.
Retains standard board feel when applied even with small gaps between the letters.Jessup – Roam Super Coarse 10″ Griptape – Roll
$5.50 – $33.00CADJessup griptape Roam Super Coarse 10 inch Black Grip tape
- Roam™ Jessup Griptape (Black)
- Super-coarse grip tape features larger grit to make it ideal for keeping your feet stuck to your skateboard or longboard
- Grip provides a stable platform for ultimate control while cruising or downhill racing
- Aggressive adhesive layers create a rock-solid bond to all boards in any environment
- Silicon-carbide formula conforms to all deck surfaces, is easy to trim, and won’t tear or wear out like other tapes
- Made in the U.S.A.