- No products in the cart.
Bones – Swiss Ceramic – Bearings
$239.99CADBones Bearings – Swiss Ceramic – Bearings
Features
Accelerate faster.
Roll faster and farther.
Resist dirt and moisture better.
Help to repair injuries to your races caused by dirt.
1 non-contact, removable rubber shields allow easy cleaning.
High speed nylon ball retainer for greater strength and speed.
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.Contents
Set of 8 bearings
4 bearing spacers
Instructions
Sticker
Bones – Super Swiss 6 Ball – Bearings
$114.99CADBones Bearings – Super Swiss 6 Ball – Bearings
Features
Single, non-contact, removable rubber shield allows for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream® racing lubricant
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.Contents
Set of 8 bearings
4 bearing spacers
Instructions
Sticker
Bones – Reds – Bearings
$29.99CADBones Bearings – Reds – Skateboard Bearings
Single, non-contact, removable rubber shield for easy cleaning and less friction
High speed Nylon™ ball retainer for greater strength and speed
Pre-lubricated with Speed Cream™ racing lubricant
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible
Venom – HPF Tall Kegs – Bushings
$18.99CADVenom – Bushings – Tall Kegs HPF
The “keg” bushing is designed to give more progressive resistance and rebound than a barrel, but without the hard stop of a normal stepped bushing. The curved side profile provides extra meat while still fitting most bushing seats. Ideal for use on the board-side, especially if you’re looking for a softer-feeling setup without losing stability. Just think of it as a barrel, but with that thicky-thicc-thicc as Nelly would say. Only compatible with Tall-bushing trucks.
Made In USA
HPF Formula:
78A – Blue
81A – Orange
85A – Yellow
87A – Purple
90A – Red
93A – Green
95A – Glow in the Dark
97A – PinkDIMENSIONS:
Height: ~18.70mm
Step Diameter (into bushing seat): ~25.10mm
Max Diameter (out of bushing seat): ~31.40mm
Inner Diameter: ~9.50mm
Venom – HPF Tall Barrel – Bushings
$17.99CADVenom – HPF Tall Barrel – Bushings Longboard Downhill Freeride
This taller Venom barrel bushing has been designed to fit tall-bushing-compatible trucks like Rogues, Ronins, Bear Kodiaks, Arsenal, etc. Them same tried and true Venom barrel shape you all know and love, just scaled up for maximum stability and dive. Try them out and enjoy!
Made In USA
HPF Formula:
73A – Light Pink
78A – Blue
81A – Orange
85A – Yellow
87A – Purple
90A – Red
93A – Green
95A – Glow in the Dark
97A – PinkVenom – HPF Barrels – Bushings
$16.99CADVenom – HPF Barrels – Bushings
Plain and simple, the Downhill Double-Barrel Pack is built for speed. Double barrels, teamed with cup washers can give your setup that fully locked in feel that gives you the confidence you need to grab some serious velocity. Barrels: .6″ tall x .97″ wide
Made In USA
HPF Formula:
73A – Light Pink
78A – Blue
81A – Orange
85A – Yellow
87A – Purple
90A – Red
93A – Green
95A – Glow in the Dark
97A – Pink
Powell Peralta – Bones Hardcore Barrel – Bushings
$21.99CADPowell Peralta – Bones Hardcore Barrel – Bushings
Duro: 85, 88, 90, 93, 95, 97
Here’s what it says on the package, and they don’t appear to be lying either:
-Patented bonded-insert technology
-More precise steering
-Quicker response
-No break-in period
-More stability
-The BEST bushings, period.
Bones – Hardcore White Pack – Bushings
$14.99CADBones – Hardcore White Pack – Bushings
FEATURES
There is no break-in period. Just put them in, adjust and skate.
Your trucks will be more responsive.
Increased truck performance
Improves your skating experience.
Your turns will be smooth and positive, not floppy or rigid.
3 Hardnesses: Hard Bushing: 96A, Medium Bushing: 91A, Soft Bushing: 81A
Bones – Hardcore Black Pack – Bushings
$14.99CADBones – Hardcore Black Pack – Bushings
FEATURES
There is no break-in period. Just put them in, adjust and skate.
Your trucks will be more responsive.
Increased truck performance
Improves your skating experience.
Your turns will be smooth and positive, not floppy or rigid.
3 Hardnesses: Hard Bushing: 96A, Medium Bushing: 91A, Soft Bushing: 81A
Speed Rings – Standard 8mm Bearing Washer Set of 8 – Raw
$3.99CADSpeed Rings – Standard 8mm Skateboard Longboard Washer Bearing Set of 8 – Raw
Speed Rings go between the face of your hanger and inside wheel bearing and the outside wheel bearing and the locking axle nut to provide the correct spacing and support for each bearing.
Size: “Standard” 8mm x 1mm
Set of 8
Steel** Use with Standard 8mm Bearing Spacers for the best results.
Bearing Spacers – Standard 8mm Set of 4 – Raw
$4.99CADBearing Spacers – Standard 8mm Set of 4 – Raw
Bearing Spacers sit between each bearing inside your wheel to provide the correct spacing and support for each bearing set.
Size: “Standard” 8mm x 10mm
Set of 8
Steel** Use with Standard 8mm Speed Rings for the best results.
Black Panhead Mounting Hardware
$4.99 – $6.99CADBlack Panhead Skateboard Longboard Mounting Hardware
Varying lengths, select the one that suits your setup needs.
FEATURES
Phillips
Black and sleek
Pan head top sits above the top ply.
Ideal for Drop Through Mounting.
Holds trucks on your board.
Comes in 1″, 1.25″, 1.5″, 1.75″ and 2″Sold as a set of 8 Nuts and Bolts.
**Panhead or Buttonhead can be used interchangeably. Pan head sits slightly taller with a defined vertical edge before the round dome head, whereas button head is more of a flush dome with no defined vertical edge. Both have flat undersides that spreads clamping force very well, rather than sinking in, making them ideal for wood and composite decks, and are required for drop through mounting where the hardware will need to have a flat interface with the truck baseplate.
Black Countersunk Mounting Hardware
$4.99 – $6.99CADBlack Countersunk Skateboard Longboard Hardware
Varying lengths, select the one that suits your setup needs.
FEATURES
Phillips.
Black and sleek.
Hardware sinks flush with top ply of your board.
Holds trucks on your board.
Comes in 1″, 1.25″, 1.5″, 1.75″ and 2″.Sold as a set of 8 Nuts and Bolts.
