- No products in the cart.
Seismic – Lokton Deep Black XSG™ 36grit Super Coarse Roll – Griptape
$10.99 – $109.99CAD
Seismic – Lokton Deep Black XSG™ 36grit Super Coarse Roll – Griptape
11-inch roll of Lokton® griptape sold by the foot.
Available in:
• 36-grit Coarse in NEW Deep Black XSG™ formula.
Noticeably sharper, tougher, and grippier. Grit stays ultra-sharp, doesn’t flake off. No smearing or peeling, even in heat or rain. The best grip in the history of grip. Lock in with Lokton™!
NEW Lokton Deep Black XSG formula available exclusively in 36-grit Rolls and custom-cut strips.
• Xtra Sharp Granules for secure, confident footing in the most demanding scenarios (e.g., extreme high-speed turns, slides, and road turbulence)
• Granules not just sharper, but also tougher and GRIPPIER!
• Superior hold when g-forces (side loads) reach maximum intensity.
• Improved PSA sticks to wider range of deck surfaces and conforms better around griptape inserts.
• Thicker backing and improved resin hold granules better than ever.
• Branded backing.
Apply Lokton only to clean, dry surfaces at room temperature. For best results, follow these directions:
1) If deck is coated with excess lacquer, buff with fine sandpaper and clean off residue.
2) Remove release paper. To help Lokton conform to more extreme deck contours, first gently warm up with natural sunlight or blow dryer. (Do not over-heat with heat gun or place in an oven!)
3) Place on deck, then immediately apply pressure by standing on all areas.
4) Trim edges by cutting from top. Do not bend or file.
Lokton conforms well to the contours of most concaves and implants.
The PSA (pressure-sensitive adhesive) on the back of Lokton is some of the best, most heat-resistant on the market. However, it does not always bond well to unusual combinations of deck-top materials and finishes – especially certain types of Formica and heavy lacquer. Your results may vary.
Share on:
Description
Description
Seismic – Lokton Deep Black XSG™ 36grit Super Coarse Roll – Griptape
11-inch roll of Lokton® griptape sold by the foot.
Available in:
• 36-grit Coarse in NEW Deep Black XSG™ formula.Noticeably sharper, tougher, and grippier. Grit stays ultra-sharp, doesn’t flake off. No smearing or peeling, even in heat or rain. The best grip in the history of grip. Lock in with Lokton™!
NEW Lokton Deep Black XSG formula available exclusively in 36-grit Rolls and custom-cut strips.
• Xtra Sharp Granules for secure, confident footing in the most demanding scenarios (e.g., extreme high-speed turns, slides, and road turbulence)
• Granules not just sharper, but also tougher and GRIPPIER!
• Superior hold when g-forces (side loads) reach maximum intensity.
• Improved PSA sticks to wider range of deck surfaces and conforms better around griptape inserts.
• Thicker backing and improved resin hold granules better than ever.
• Branded backing.Apply Lokton only to clean, dry surfaces at room temperature. For best results, follow these directions:
1) If deck is coated with excess lacquer, buff with fine sandpaper and clean off residue.
2) Remove release paper. To help Lokton conform to more extreme deck contours, first gently warm up with natural sunlight or blow dryer. (Do not over-heat with heat gun or place in an oven!)
3) Place on deck, then immediately apply pressure by standing on all areas.
4) Trim edges by cutting from top. Do not bend or file.Lokton conforms well to the contours of most concaves and implants.
The PSA (pressure-sensitive adhesive) on the back of Lokton is some of the best, most heat-resistant on the market. However, it does not always bond well to unusual combinations of deck-top materials and finishes – especially certain types of Formica and heavy lacquer. Your results may vary.
Additional information
Additional information
Weight 2 lbs Dimensions 12 × 12 × 2 in Grip Length 1', 12', 3', 4', 6', 8', 9'
Related Products
Bones – Super Reds – Bearings
$47.99CADBones Bearings – Super Reds – Bearings
Features
Features Higher quality steel races, better quality and grade balls, and a superior surface finish.
Single, non-contact, removable rubber shield for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream™ racing lubricant
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.Contents
Set of 8 bearings
Instructions
StickerBones – Super Swiss 6 Ball – Bearings
$99.99CADBones Bearings – Super Swiss 6 Ball – Bearings
Features
Single, non-contact, removable rubber shield allows for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream® racing lubricant
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.Contents
Set of 8 bearings
4 bearing spacers
Instructions
StickerZealous – Classic Steel Precision Built In – Bearings
$21.99CADZealous – Classic Steel Precision Built In – Bearings
Feature:
– Steel Balls
– Precision 8mm axle holes
– .4045″ built in spacers
– .5mm built in speedrings
– Green rubber seals to keep dirt and debris on the outside of the bearing.
– Lubed with Custom Nanoceramic Grease
-The unique feature of the lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.
-The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.
-Extremely low water washout
-Corrosion on the inside of the bearing is nearly eliminated.Sold in sets of 8 bearings.
