- No products in the cart.
Prime x World Industries – Mike Vallely Elephant on the Edge – Enamel Pin
$14.99CAD
Prime x World Industries – Mike Vallely Elephant on the Edge – Enamel Pin
Out of stock
Share on:
Description
Description
Prime x World Industries – Mike Vallely Elephant on the Edge – Enamel Pin
Additional information
Additional information
Weight .5 lbs Dimensions 12 × 12 × 2 in
Related Products
Powell Peralta – Mike Vallely Bug ’02’ Blue w/Red Foil – 10in x 30.25in
$139.99CADPowell Peralta – Mike Vallely Bug ’02’ Blue with Red Foil – 10in x 30.25in
Straight out of the Powell Peralta vaults, the Vallely Bug graphic was initially turned down by Mike himself, and almost lost to our dusty archives. Originally sketched for the Geegah shape, Mike went with the iconic Elephant design for his debut pro model—legendary in its own right. But now, thanks to Sean Cliver’s Disposable for inspiration, this unreleased graphic is finally dropping on the classic Elephant shape.
Bonus trivia: The colorway? Printed half-scale on copy paper and brought to life with magic marker. DIY history.
• Artwork by VCJ 1988
Features:
• long 4 – 2.5″ old school truck hole pattern
• original shape, concave, and truck hole pattern
• Powell-Peralta™ Re-Issue ConstructionDetails:
Deck Shape 163B
Deck Concave SP3
Deck Wheelbase 15″
Deck Length 30″
Deck Width 9.85″
Deck Nose 4″
Deck Tail 6″*Due to the nature of foil during the production process, you may notice some faint lines or subtle inconsistencies. This is completely normal.
**If you don’t plan on skating this deck, please handle carefully when removing from the packaging. The ink/foil adhesion is delicate and can be easily scratched.
Powell Peralta – Supreme Crown – Patch
$7.99CADPowell Peralta – Supreme Crown – Patch
Originally Released: 1991
Artwork by: Craig StecykAbout Powell Peralta Patches:
Powell Peralta embroidered patch
2.5″ diameter
iron-on backingDenim and cotton material provide the best base. Be careful of polyester.
Put the item on a hard surface, like an ironing board. Iron it to create a nice, flat surface.
Place the patch where you want it to be.
Heat up the iron to it’s hottest setting.
Place a thin cloth over the patch. (This will protect the patch and any surrounding material).
Place the iron over the patch and press down hard as possible for 15-30 seconds.
Remove the iron and let patch cool.
Check the patch by gently rubbing at the edge, trying to lift it. If it lifts, replace the thin material and iron again for 10- 15 seconds.
To ensure a secure patch you can also sew around the edges.
