- No products in the cart.
Seismic – 10-Degree Angled Wedges – Risers
$23.99CADSeismic Skate – 10-Degree Angled Wedges – Truck Risers
Precision-Machined • Ultra-Low Profile • Easy to Stack!
Pack of one (1) 10-degree Riser
Packaged in pair of two (2) 10-degree Risers, with an advanced feature set never before seen in combination…
Advanced feature set never before seen in combination:
• Thin ends reduced to 0.5mm-thickness for lowest-possible profile and minimum impact on truck height.
• Mounting hole dimensions highly optimized for easy stacking. No more bent bolts from riser hole misalignment!*
• Biomimetic “honeycomb” structure maximizes support with minimal material.
• CNC-machined from tough composite with superior dimensional stability. Highly resistant to deformation from extreme loads and impacts.
• Drilled for Old School mounting hole pattern, but accommodates New School hole pattern, too.
Apex Prototyping – Black Hard Plastic – Angled Riser Pads
$4.99CADApex Prototyping Black Hard Plastic Angled Riser Pads
Add an Apex Prototyping angled or wedge riser pad to adjust the angle or wedging of your trucks. Apex riser pads are 3D printed out of high quality materials and come in 90a and 85a urethane or hard plastic in both flat and angled varieties. Apex angled risers come in 3.5, 5, 8, and 10 degree angles.
Price is for one (1) riser pad.
Apex Prototyping – Clear Translucent 90a – Angled Riser Pads
$4.99CADApex Prototyping Clear Translucent 90a Angled Riser Pads
Add an Apex Prototyping angled or wedge riser pad to adjust the angle or wedging of your trucks. Apex riser pads are 3D printed out of high quality materials and come in 90a and 85a urethane or hard plastic in both flat and angled varieties. Apex angled risers come in 3.5, 5, 8, and 10 degree angles.
Price is for one (1) riser pad.
Apex Prototyping – Red Translucent 90a – Angled Riser Pads
$4.99CADApex Prototyping Red Translucent 90a Angled Riser Pads
Add an Apex Prototyping angled or wedge riser pad to adjust the angle or wedging of your trucks. Apex riser pads are 3D printed out of high quality materials and come in 90a and 85a urethane or hard plastic in both flat and angled varieties. Apex angled risers come in 3.5, 5, 8, and 10 degree angles.
Price is for one (1) riser pad.
Apex Prototyping – Blue Translucent 90a – Angled Riser Pads
$4.99CADApex Prototyping – Blue Translucent 90a – Angled Riser Pads
Add an Apex Prototyping angled or wedge riser pad to adjust the angle or wedging of your trucks. Apex riser pads are 3D printed out of high quality materials and come in 90a and 85a urethane or hard plastic in both flat and angled varieties. Apex angled risers come in 3.5, 5, 8, and 10 degree angles.
Price is for one (1) riser pad.
Apex Prototyping – Alfred Backstop – Blue 90a
$49.99CADApex Prototyping – Alfred Backstop – Blue 90a
Made out of 90a urethane and meant to be bolted, velcro’s or glued to your deck under your griptape to help shift your weight forward and increase front foot leverage for tucking and sliding.
Individually sold.
Apex Prototyping – Classic Backstop – Black 90a
$59.99CADApex Prototyping – Classic Backstop – Black 90a
Made out of 90a urethane and meant to be bolted, velcro’s or glued to your deck under your griptape to help shift your weight forward and increase front foot leverage for tucking and sliding.
Width: 6.90″
Length: 5.90″
Height: 0.70″Individually sold.
Apex Prototyping – Torque Converter – Red 90a
$29.99CADApex Prototyping – Torque Converter – Red 90a
Made out of 90a urethane and meant to be bolted, velcro’s or glued to your deck under your griptape to help shift your weight forward and increase front foot leverage for tucking and sliding.
Width: 4.30″
Length: 4.30″
Height: 0.40″Individually sold.
Flip Strips – Concave Implants
$14.99CADFlip Strips – Skateboard Griptape Concave Implants
Slap Flip Strips on the top of your deck and add your grip for more concave and extra control. You’ll get a consistent flip trick experience and far better board feel from day one. Plus, it’s easy to apply, so you’ll be innovating right away!
Flip Strips set of 2
White with peel off adhesive backing
11 inches long x 1/4 inch wide
Stick Flip Strips on the top of your deck, before you grip your deck.
designed to give more concave and extra control.
Valkyrie Truck Co. – MK3 Slalom Wheelbite Blocker
$6.99CADValkyrie Truck Co. – MK3 Slalom Wheelbite Blocker
95a Urethane sleeve sits at the base of your kingpin and prevents wheelbite for most setups. Highly recommended for LDP where soft bushings are common and riders seek to get every bit of steering out of their trucks.
Blockers are sold as a single unit. No other parts included.
Tail Devil – Rail Devils Sparking Rails – Red
$39.99CADRail Devils Sparking Skateboard Rails
They heard our prayers and the devil has answered! Since the resurrection, fans have been clamouring for Rail Devils, and from the abyss, it has come to pass! Tail Devil has spawned the Rail Devils! These are the first and only premium skateboard deck rails with a hellacious amount of infused flints for maximum sparks and fun.
Color: Red
Size: 14.25″
Weight: 200g (total with package, screws, bit)
Material: UMHW
Includes: Rail Devil 3M Mounting Tape, 10 Philips Screws, 10 Star Screws, custom double ended bit with a Phillips #2 on one end and Star T-10 on the other.🔥 SPARK IT UP WITH RAIL DEVILS: 28 spark producing flint cylinders are infused upon the face of each Rail Devil. Evenly spread across the whole sliding surface to maximize sparks during any slide trick variation. Hit a lipslide, boardslide or a properly dipped smith grind and watch the sparks fly! Looks extra cool at night.
🔥 FUNCTIONALITY & QUALITY: Rail Devils are made of premium UHMW polyethylene plastic for consistent unholy slides. Preserve and protect your board’s graphics. Ridden, tested and endorsed by professional skateboarders.
🔥 UNIQUE FEATURES & PROGRESSIVE DESIGN: Adhesive 3M tape backing to help with installation and to prevent rattling while skating. Rail Devils are the only skateboard deck rails that include a bit and come with two different sets of self-tapping wood screws to chose from. 10 Phillips-head or 10 Star Head mounting screws. The included bit is a custom made double ended bit; Phillips #2 on one end and Star T-10 on the other.
🔥 COMPATIBILITY: 14.25 inches long to fit most all standard skateboard decks. 5 screw holes per Rail Devil for a secure hold. Classic mid sized rail shape.
🔥 GUARANTEED FUN: Skateboarding is a blast on its own, but add some sparks, and you’ll get really fired up! Lite up that curb session or bless a young skater with this epic gift. Patent Pending and Made in Hell!
Seismic – Fullspin Precision Profiled XT Steel – Bearing Spacers
$14.99CADFullspin™ Precision-Profiled XT™ Steel Spacers
Premium 0.400-inch steel bearing spacers. Fit standard 8mm axles only.
Fullspin’s unique Precision-Profiled XT (Extra-Tough) Steel Spacers have broad flanged ends that square up against Classic (non-Built-In) inner ring surfaces with up to 67% more contact area – powering unprecedented Classic alignment precision and stability.
Design levels and steadies all working components of seated bearings far more precisely and stably than Classic spacers from other brands – which are typically rough-cut from thin-walled, easily-bent iron or aluminum, with oversized bores that rock on axles.
This is hands-down the most advanced Classic bearing alignment tech ever seen in the skate world, and it unleashes truly exceptional paired performance. Synergizes with working features in all high-quality Classic bearings* to maintain exceptionally consistent wheel contact and grip; support extremely predictable slide performance; and noticeably extend both wheel and bearing life.
Precision-machined from premium bearing steel with advanced heat-treatment for unmatched strength and toughness.
Spacer width set to extra-strict 0.400-inch tolerance, to support highly accurate positioning of paired bearings inside finer wheels with well-engineered hubs.
Radius reduced to bare minimum on spacer edges, for fuller contact and more stable alignment at bearing interfaces. Bore specs dialed to maintain exceptional straightness on finer axles.
* For best results, use with Seismic® Fullspin Classic bearings, which have extra-wide inner ring contact surfaces that exactly match the profiled spacer ends.
Apex Prototyping – Gavin’s Bananus – Toestop
$7.99CADApex Prototyping – Gavin Rutherford Bananus – Footstop Toestop
Designed to improve contact with your grip and control of your board.
Most shoes have a slight rocker which means you have to fight the shape of your shoe to get proper contact with your board. Gavin Rutherford designed this curved wedge for your toeside to help fill that space on your front foot, or to use it as a spot to feel if your rear foot is in the right spot and to hold it in place in a corner or slide.
Made out of 90a urethane meant to be glued to your deck under your griptape.
Individually sold.
Loaded – Tangent Complete – 85mm 80a Caguama
$539.99CADLoaded X G-Bomb Fathom Complete Zee Bracket Mounting System With Paris 150mm and 105mm 80a Dad Bods Complete
Introducing the Loaded Fathom, the longboard that blurs the boundaries of what a skateboard can be.
The Fathom is one of the easiest boards to ride in the world and a ton of fun. Built around the new Loaded Zee Bracket truck mounting system. With large wheels and a low ride height, the Fathom reimagines soulful commuting and urban exploration.
LONGBOARD SPECS
• Length: 33″ / 83.8 cm (complete), 23″ / 58.4 cm (deck)
• Width: 9.25″ / 23.5 cm
• Wheelbase: 26.5″ / 67.3 cm (complete), 17.25″ / 43.8 cm (deck)
• Profile: slight camber
• Flex: subtle
• Weight: 9.6 lb / 4.4 kg (Dad Bod), 8.4 lb / 3.8 kg (Caguama), 3.1 lb / 1.4 kg (deck)
• Designed for riders up to 250 lb / 113 kg under normal use. Riders 250-300 lb / 113-136 kg should minimize aggressive pumping.COMPLETE SETUP
• Bracket: Loaded Zee Bracket (NEW)
• Trucks: Paris V2 150mm 50° (raw)
• Wheels: Orangatang 105mm Dad Bod (80a, orange)
• Bearings: Loaded Jehu V2
• Hardware: Loaded (two sets: 1.25″ at deck, 1″ at trucks)
Loaded – Tangent Complete – 105mm 77a Dad Bod
$599.99CADLoaded X G-Bomb Tangent Complete Zee Bracket Mounting System With Paris 150mm and 105mm 77a Dad Bod Complete
Easily ride longer distances, commute to work or class, or just enjoy our lowest and most stable double-drop bracket board for cruising at speed.
Length
35.75″ / 91.4 cm (complete), 26″ / 66.0 cm (deck)
Width
9.75″ / 24.8 cm
Wheelbase
29.375″ / 74.6 cm (complete), 20.25″ / 51.4 cm (deck)
Profile
Rocker
Stiffness
Subtle
Weight (deck only)
4.3 lb / 2.0 kgComplete build kit:
Deck: Loaded Tangent
Bracket: Loaded Zee Bracket
Trucks: Paris V2 150mm 50° (raw)
Wheels: Orangatang 105mm 77a Blue Dad Bod
Bearings: Loaded Jehu V2 or Zealous Classic
Hardware: Loaded (two sets: countersunk 1.25″ at deck, button head 1″ at trucks)Want the 80a Orange Dad Bod instead? Leave a comment in the order notes and we can change it for you! No additional charge to change wheel durometer.
Seismic – Skid Plates Round White – 180mm
$15.99CADSeismic Skate High-Performance Ergonomic Skid Plates 180mm Round White
Seismic Skates 180mm Round Skid Plates in White.
– 180mm (7.1″) Round: Fits many Old School Pool / Park decks and modern DH / Freeride decks with tails.
– 8mm (5/16″) thick. Packaged with mounting instructions and hardware (rivet nuts and machine screws).
Seismic – Skid Plates Round Black – 180mm
$15.99CADSeismic Skate High-Performance Ergonomic Skid Plates 180mm Round Black
Seismic Skates 180mm Round Skid Plates in Black.
– 180mm (7.1″) Round: Fits many Old School Pool / Park decks and modern DH / Freeride decks with tails.
– 8mm (5/16″) thick. Packaged with mounting instructions and hardware (rivet nuts and machine screws).
Seismic – Skid Plates Round Black – 150mm
$15.99CADSeismic Skate High-Performance Ergonomic Skid Plates 150mm Round Black
Seismic Skates 150mm Round Skid Plates in Black.
– 150mm (5.9″) Round: Fits most medium / wide Street decks with “round” ends.
– 8mm (5/16″) thick. Packaged with mounting instructions and hardware (rivet nuts and machine screws).
Seismic – Skid Plates Egg White- 140mm
$15.99CADSeismic Skate High-Performance Ergonomic Skid Plates 140mm Egg White
Price is for one (1) Skid Plate.
– 140mm (5.51″) Egg: Fits many modern Longboard Freestyle decks and most medium / wide Street decks with “egg”-shaped ends.
– 8mm (5/16″) thick. Packaged with mounting instructions and hardware (rivet nuts and machine screws).
Seismic – Skid Plates Egg Black- 140mm
$15.99CADSeismic Skate High-Performance Ergonomic Skid Plates 140mm Egg Black
Price is for one (1) Skid Plate.
– 140mm (5.51″) Egg: Fits many modern Longboard Freestyle decks and most medium / wide Street decks with “egg”-shaped ends.
– 8mm (5/16″) thick. Packaged with mounting instructions and hardware (rivet nuts and machine screws).
Seismic – Fullspin 10mm Steel XT Built-In – Bearings
$61.99CADSeismic Skate – Fullspin 10mm Steel XT Built-In – Bearings
Fullspin™ 10mm Steel XT™ Bearings with Patented High-Precision Built-In Spacer System
Next-level skate bearing tech – more speed, better handling, longer life!
Fit standard 8mm axles only.6-Ball system
Premium Steel balls
Exceptionally tight, consistent assembly and raceway tolerances
Extra-tough steel and thicker outer rings
Next-level patented Built-In spacing / alignment system
High-end lubricant
Labyrinth-style outer seals
Next-level anti-contaminant ball retainers
Seismic – Fullspin 10mm Ceramic XT Built-In – Bearings
$129.99CADSeismic Skate – Fullspin 10mm Ceramic XT Built-In – Bearings
Fullspin™ 10mm Ceramic XT™ Bearings with Patented High-Precision Built-In Spacer System
Next-level skate bearing tech – more speed, better handling, longer life!
ONLY for extra-thick 10mm axles. Will not fit standard 8mm axles.10MM system
Premium Ceramic balls
Exceptionally tight, consistent assembly and raceway tolerances
Extra-tough steel and thicker outer rings
Next-level patented Built-In spacing / alignment system
High-end lubricant
Labyrinth-style outer seals
Next-level anti-contaminant ball retainers
