- No products in the cart.
Whether you like your grip tape basic black to super coarse or every color and graphic you can imagine, we’ve got the biggest and best selection of skatebaoard and longboard griptape around!
-
Black Griptape
-
Clear Griptape
-
Graphic Griptape
-
Downhill Griptape
-
Griptape Accessories
-
Darkroom
-
Grizzly Griptape
-
Jessup Griptape
-
Madness
-
Mob Grip
-
Powell Peralta
-
Seismic Skates
-
Shake Junt
-
Vicious Griptape
Seismic – Lokton Deep Black XSG™ 36grit Super Coarse Roll – Griptape
$10.99 – $109.99CADSeismic – Lokton Deep Black XSG™ 36grit Super Coarse Roll – Griptape
11-inch roll of Lokton® griptape sold by the foot.
Available in:
• 36-grit Coarse in NEW Deep Black XSG™ formula.Noticeably sharper, tougher, and grippier. Grit stays ultra-sharp, doesn’t flake off. No smearing or peeling, even in heat or rain. The best grip in the history of grip. Lock in with Lokton™!
NEW Lokton Deep Black XSG formula available exclusively in 36-grit Rolls and custom-cut strips.
• Xtra Sharp Granules for secure, confident footing in the most demanding scenarios (e.g., extreme high-speed turns, slides, and road turbulence)
• Granules not just sharper, but also tougher and GRIPPIER!
• Superior hold when g-forces (side loads) reach maximum intensity.
• Improved PSA sticks to wider range of deck surfaces and conforms better around griptape inserts.
• Thicker backing and improved resin hold granules better than ever.
• Branded backing.Apply Lokton only to clean, dry surfaces at room temperature. For best results, follow these directions:
1) If deck is coated with excess lacquer, buff with fine sandpaper and clean off residue.
2) Remove release paper. To help Lokton conform to more extreme deck contours, first gently warm up with natural sunlight or blow dryer. (Do not over-heat with heat gun or place in an oven!)
3) Place on deck, then immediately apply pressure by standing on all areas.
4) Trim edges by cutting from top. Do not bend or file.Lokton conforms well to the contours of most concaves and implants.
The PSA (pressure-sensitive adhesive) on the back of Lokton is some of the best, most heat-resistant on the market. However, it does not always bond well to unusual combinations of deck-top materials and finishes – especially certain types of Formica and heavy lacquer. Your results may vary.
Mob – Pac-Man Logo 9in. – Griptape
$19.99CADMob – Pac-Man Logo 9in. – Skateboard Griptape
9″ x 33″
Mob Grip X Skate Like a Girl single sheet grip tape.
Get Radical with the first ever Skate Like a Girl X Santa Cruz collection with artwork by Hannah Eddy. Skate Like a Girl is a 501(3)C non profit with a mission to make skateboarding more inclusive for all. For this collection Hannah Eddy @hannaheddyart brings an array of skate snails, filmer frogs, and cheerful natural elements all in her whimsical signature style.
The #1 Griptape Choice of the Pros!
Using the clear grit formula, MOB Grip colors, prints, and transparent colors won’t let you get caught slippin’ and feature vivid colors and patterns without sacrificing performance. Cut and customize with other colors and MOB Clear for endless creativity.
MOB Clear features:
-Exclusive, optically transparent formula that goes on clear and stays clear
-Hundreds of barely-visible perforations that allow air to escape for a bubble-free application
-Exclusive grit binding process for grip that will not wear out
-High-strength, waterproof backing that trims cleanly every time
-Super sticky adhesive that won’t peel in extreme heat or coldNo bubbles, no troubles. MOB Clear is clearly The Grippiest.
Mob – Natas Panther SMA x Screaming Hand Clear 9in. – Griptape
$19.99CADMob – Natas Panther SMA x Screaming Hand Clear 9in. – Griptape
9″ x 33″
The #1 Griptape Choice of the Pros!
MOB Grip features:
-Hundreds of barely-visible perforations that allow air to escape for a bubble-free application
-Exclusive silicon-carbide grit binding process for grip that will not wear out
-High-strength, waterproof, tear-proof backing that trims cleanly every time
-Super sticky adhesive that won’t peel in extreme heat or coldNo bubbles, no troubles. MOB Grip is The Grippiest.
Mob – Natas Panther SMA x Santa Cruz Clear 9in. – Griptape
$19.99CADMob – Natas Panther SMA x Santa Cruz Clear 9in. – Griptape
9″ x 33″
The #1 Griptape Choice of the Pros!
MOB Grip features:
-Hundreds of barely-visible perforations that allow air to escape for a bubble-free application
-Exclusive silicon-carbide grit binding process for grip that will not wear out
-High-strength, waterproof, tear-proof backing that trims cleanly every time
-Super sticky adhesive that won’t peel in extreme heat or coldNo bubbles, no troubles. MOB Grip is The Grippiest.
Apex Prototyping – Classic Backstop – Red 90a
$59.99CADApex Prototyping – Classic Backstop – Red 90a
Made out of 90a urethane and meant to be bolted, velcro’s or glued to your deck under your griptape to help shift your weight forward and increase front foot leverage for tucking and sliding.
Width: 6.90″
Length: 5.90″
Height: 0.70″This is Translucent Red Backstop. If you want a custom color please email info@flatspotlongboards.com
Individually sold.
Mob – Creature Logo Outline 10in. – Griptape
$21.99CADMob Skateboard Griptape – Creature Logo Outline 10in. – Grip tape Sheet
10″ x 33″
The #1 Griptape Choice of the Pros!
MOB Grip features:
-Hundreds of barely-visible perforations that allow air to escape for a bubble-free application
-Exclusive silicon-carbide grit binding process for grip that will not wear out
-High-strength, waterproof, tear-proof backing that trims cleanly every time
-Super sticky adhesive that won’t peel in extreme heat or coldNo bubbles, no troubles. MOB Grip is The Grippiest.
Mob – Roskopp 3 11in. – Griptape
$21.99CADMob Skateboard Griptape – Roskopp 3 11in. – Griptape
11″ x 33″
The #1 Griptape Choice of the Pros!
MOB Grip features:
-Hundreds of barely-visible perforations that allow air to escape for a bubble-free application
-Exclusive silicon-carbide grit binding process for grip that will not wear out
-High-strength, waterproof, tear-proof backing that trims cleanly every time
-Super sticky adhesive that won’t peel in extreme heat or coldNo bubbles, no troubles. MOB Grip is The Grippiest.
Apex Prototyping – Alfred Backstop – Blue 90a
$49.99CADApex Prototyping – Alfred Backstop – Blue 90a
Made out of 90a urethane and meant to be bolted, velcro’s or glued to your deck under your griptape to help shift your weight forward and increase front foot leverage for tucking and sliding.
Individually sold.
Apex Prototyping – Classic Backstop – Black 90a
$59.99CADApex Prototyping – Classic Backstop – Black 90a
Made out of 90a urethane and meant to be bolted, velcro’s or glued to your deck under your griptape to help shift your weight forward and increase front foot leverage for tucking and sliding.
Width: 6.90″
Length: 5.90″
Height: 0.70″Individually sold.
Apex Prototyping – Torque Converter – Red 90a
$29.99CADApex Prototyping – Torque Converter – Red 90a
Made out of 90a urethane and meant to be bolted, velcro’s or glued to your deck under your griptape to help shift your weight forward and increase front foot leverage for tucking and sliding.
Width: 4.30″
Length: 4.30″
Height: 0.40″Individually sold.
Flip Strips – Concave Implants
$14.99CADFlip Strips – Skateboard Griptape Concave Implants
Slap Flip Strips on the top of your deck and add your grip for more concave and extra control. You’ll get a consistent flip trick experience and far better board feel from day one. Plus, it’s easy to apply, so you’ll be innovating right away!
Flip Strips set of 2
White with peel off adhesive backing
11 inches long x 1/4 inch wide
Stick Flip Strips on the top of your deck, before you grip your deck.
designed to give more concave and extra control.Apex Prototyping – Gavin’s Bananus – Toestop
$7.99CADApex Prototyping – Gavin Rutherford Bananus – Footstop Toestop
Designed to improve contact with your grip and control of your board.
Most shoes have a slight rocker which means you have to fight the shape of your shoe to get proper contact with your board. Gavin Rutherford designed this curved wedge for your toeside to help fill that space on your front foot, or to use it as a spot to feel if your rear foot is in the right spot and to hold it in place in a corner or slide.
Made out of 90a urethane meant to be glued to your deck under your griptape.
Individually sold.
Tail Devil – Spark Skid Plates – Black
$29.99CADOriginal Tail Devil Skateboard Spark Skid Plates Sparking Flint Black
Tail Devil skateboard spark plates are back and available for purchase now. Spark it up!
One Tail Devil.
Color: Black
Size: 5.7cm x 3.8cm x 1.27cm
Weight: 40g
Material: Plastic Acrylic
Includes: One Tail Devil 3M Mounting Tape, 2 Philips ScrewsPepper Grip – Alphanumeric Custom Griptape Kit
$28.99CADPepper Alphanumeric Custom Griptape Kit
Over 170 characters that allow you to customize your grip. Use in addition to a sheet of grip to make this custom kit cover multiple boards. 3 laser die cut sheets allow you to mix and match creating your own custom design. High adhesive letters don’t fall off when skated. Retains standard board feel when applied even with small gaps between the letters.
Pepper Grip Tape Alphanumeric pack
3 laser cut die sheets 11″ x 9″ each
over 170 characters to customize your grip
Use in addition to a sheet of grip to make this custom kit cover multiple boards.
Mix and match creating your own custom design.
High adhesive letters don’t fall off when skated.
Retains standard board feel when applied even with small gaps between the letters.Jessup – Roam Super Coarse 10″ Griptape – Roll
$5.49 – $57.99CADJessup – Roam Super Coarse 10″ Griptape – Roll
– Roam™ Jessup Griptape (Black)
– Super-coarse grip tape features larger grit to make it ideal for keeping your feet stuck to your skateboard or longboard
– Grip provides a stable platform for ultimate control while cruising or downhill racing
– Aggressive adhesive layers create a rock-solid bond to all boards in any environment
– Silicon-carbide formula conforms to all deck surfaces, is easy to trim, and won’t tear or wear out like other tapes
– Made in the U.S.A.
