Giants Head Freeride 2017 – Gear Checklist – Flatspot Longboards

Dates for Giants Head Freeride 2017 have been announced! Make sure you are prepared for three days of utterly amazing runs and don’t get caught without the necessities.

Last year Giants Head Freeride was AWESOME! Flatspot team rider Laine Jackart took second at the race, the King of the Coast contest was in full swing, and everyone had a good time. The one defining feature of this event is the number of runs. There are a lot of runs, and each run has a lot of corners. This equates to a lot of slides, and for most of us, a decent amount of bails as well. So make sure you come stocked up and prepared, because the giants takes what it wants, and it has no mercy.
10 things you will want to stock up on for Giants Head Freeride June 26-28th

1. Daves Hippy oil… no matter how many wheels you torch, you’re road rash will need more attention. Don’t be having a staph party at skate events, its bad karma.

2. Wheels… This is GHF. Endless runs, many slides. It should be called skidfest, but thats the event in my underpants. Which you should bring extra’s of as well.

  • Boss Hawgs – 70mm

    $49.00CAD

     

    SPECIFICATIONS

    • Diameter: 70mm
    • Contact Patch: 30mm
    • Durometer: 76a, 78a, 80a
    • Lip Profile: Round Lip
    • Core Placement: Centerset
    • Wheel Surface: Stoneground
  • On Sale

    Abec 11 – Amber Freerides – 64mm

    $59.99 $49.99CAD

    These brand new 64mm FreeRides with our stone ground finish will leave golden lines of thane right out of the box! They feature our wide “FreeRide Core” that provides extra support to keep them amazingly stable and smooth while sliding. They also feature our legendary classic 81a amberthane, which results in a smooth, fast and drifty wheel that won’t let you down. Set these up on your favorite small-sized freeride or cruising board and you’ll be one very happy camper.

3. Toestop… If your riding a topmount, there is a very good chance you might appreciate rocking a toestop for this event. Between the occasional road heave, the excessive sliding and the pinecones there are ample opportunities for your foot to get bucked into all kinds of unfortunate places.

  • Riptide – PSD Footstop – Mini In & Out

    $16.00CAD

    Conforms to fit the concave of your board
    Custom 60d Urethane
    Durable
    Lightweight .9 oz / 25 gm
    Length: 1.85″ / 47 mm
    Width:  1.95″ / 49.5 mm
    Height:  .98″ / 24.8 mm
    Slot Length:  1.15″ / 29.2 mm

  • Riptide – PSD Footstop – In & Out

    $24.00CAD

    ⦁ Conforms to fit the concave of your board
    ⦁ Custom 60d Urethane
    ⦁ Durable
    ⦁ Lightweight 1.6 oz / 45 gm
    ⦁ Length: 2.73″ / 69.3 mm
    ⦁ Width:  2.73″ / 69.3 mm
    ⦁ Height:  .98″ / 24.9 mm
    ⦁ Slot Length:  1.25″ / 31.7 mm (Straight) 1.68″ / 42.7 mm (curved)

  • Riptide – PSD Footstop – OUTside

    $24.00CAD

    ⦁ Conforms to fit the concave of your board
    ⦁ Custom 60d Urethane
    ⦁ Durable
    ⦁ Lightweight 1.1 oz / 32 gm
    ⦁ Length: 1.56″ / 39.6 mm
    ⦁ Width:  3.44″ / 87.4 mm
    ⦁ Height:  .93″ / 23.6 mm
    ⦁ Slot Length:  .75″ / 19.1 mm

  • Rogers Bros – Outward Foot Stop

    $39.99CAD

    This is not your ordinary toe stop. By loosening two mounting bolts, you can change the angle and position of this footstop on the fly to fully tweak your set up. The shape of this foot stop is for those who like to have a little extra range of motion with their front foot. Particularly fond amongst those who prefer freeriding. The handy part of this footstop is that you can flip it and ride it as an inward footstop! It also sits raised on your board to provide extra support and keep your feet where they should be! You can flip the wing to accommodate regular or goofy.

    Specifications:

    • Inward wing is 5.25″ long
    • Sits .75″ above the top of your board
  • Rogers Bros – OG Original Aluminum Foot Stop

    $29.99CAD

    Single piece construction. 6061-T6 Aluminum. Regular or goofy. Concave/hook contact surface.

  • Riptide – PSD Footstop – KoMotion

    $11.99CAD

    New Cog-Shaped Grooved FootStop, the KoMotion:

    Conforms to fit the concave of your board
    Custom KranK 95a Urethane so your toe will ‘mold’ slightly against the cog to help prevent slipping
    Durable
    Super Lightweight: .25 oz / 7 gm
    Diameter: 1.00″ / 25.4 mm
    Height: .76″ / 19.3 mm
    7 Fun Colors to choose from!

    Sold Individually with a washer, 1.75″ bolt, nut, PSD sticker & a RipTide sticker.

4. Pucks (maybe gloves too)… even if your stand up skills are above average, shit happens and you’re going to want a solid glove and puck on hand to save you… especially with all the pinecones!

Speaking of pinecones, check out this epic gif we ripped off from skateslate’s blog!

5. Knee, elbow, and hip/ass pads… there is no better way to keep skating longer, than avoiding slams all together, but slams happen, so having some pads can keep your out of the Med Tech tent. Worried about looking like a kook? We’re Kooks. Fuck that shit. Pad up and give no fucks. Pro Tip: Spine Protectors are the new black.

 

  • Triple 8 – Saver Series 3-Pack Pad Set

    $54.99CAD

    Save some body parts, and some dough.

    Protecting your wrists, knees and elbows is now more convenient and affordable than ever. Our Saver Series 3-Pack Box comes with Wristsavers, Kneesavers and Elbowsavers—everything you need to keep you protected below the head.

    Knee & Elbow Pads:

    • Lightweight, shock absorbing ventilated EVA foam
    • High-density, impact-resistant polyethylene cap with rivet reinforcement
    • Wide, reinforced elastic straps secured to an abrasion resistant nylon body for durability

    Wrist Guards:

    • High-density, impact-resistant molded ABS splints on front and back for support
    • Lightweight, shock absorbing EVA foam
    • 4-way stretchable nylon mesh with reinforced double stitching
  • Triple 8 – Wristsaver Wrist Guards

    $26.99CAD

    Solid wrist support and protection, front to back.

    Our Wristsavers let you skate hard and fall harder. You’ll take comfort in their snug, stretchy fit, plus shock-absorbing EVA foam tucked between impact-resistant ABS splints on front and back.

    • Tough, 4-way stretch nylon mesh provides a snug fit
    • High-density, impact-resistant molded ABS splints on front and back for support
    • Shock absorbing EVA foam secured between support splints and wrist for cushioning

6. Bearings… everyone forgets to bring an extra set (or two) of bearings. GHF is dusty as fuck when it’s dry and wet is wet, so why blow a bearing and not be prepared.

  • Bones Swiss Ceramic Bearings

    $189.99CAD

    Features
    Accelerate faster.
    Roll faster and farther.
    Resist dirt and moisture better.
    Help to repair injuries to your races caused by dirt.
    1 non-contact, removable rubber shields allow easy cleaning.
    High speed nylon ball retainer for greater strength and speed.
    Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.

    Contents
    Set of 8 bearings
    4 bearing spacers
    Instructions
    Sticker

  • Zealous – Ceramic Bearings

    $39.99CAD

    Ceramic Balls
    -Ceramic balls are lighter, stiffer, smoother and naturally corrosion resistant. This means we can use a lower viscosity lubricant which makes them fast right out of the tube.
    – Precision 8mm axle holes
    – .4045″ built in spacers
    – .5mm built in speedrings
    – Strengthened Nylon Ball Retainers
    – White rubber seals to keep dirt and debris on the outside of the bearing.
    – Lubed with Custom Nanoceramic Grease
    -The unique feature of our lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.
    -The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.
    -Corrosion on the inside of the bearing is nearly eliminated.

    Sold in sets of 8 bearings.

  • Bones Swiss Bearings

    $74.99CAD

    Features
    Single, removable, non-contact rubber shield allows easy cleaning and low friction.
    High speed nylon ball retainer provides added strength and speed.
    Pre-lubricated with Speed Cream racing lubricant
    Skate Rated; clearances, tolerances, materials and lubricant provide the best performance and durability possible.
    Best selling high end skate bearing in the U.S.A.

    Contents
    Set of 8 bearings
    4 bearing spacers
    Instructions
    Sticker

  • Bones – Speed Cream

    $12.00CAD

    Bones® Speed Cream® is a high temperature, low viscosity synthetic skate lubricant specially formulated by Bones® to reduce friction, and provide a durable micro film of lubricant to protect against corrosion. We have found this lubricant to be superior to Teflon™ based lubricants in skate environments. Speed Cream R.F. makes your bearings faster and is very long lasting.

  • Bones Big Balls Reds Bearings

    $31.99CAD

    SIX BIGGER BALLS
    HIGHER TOP END SPEED
    GREATER STRENGTH
    LONGER LASTING
    SKATE RATED

  • Bones Super Reds Ceramic Bearings

    $115.99CAD

    Features
    Features grade 5, silicone nitride, hot isostatically pressed ceramic balls.
    Higher quality steel races and a superior surface finish.
    Single non-contact removable rubber shield for easy cleaning and less friction.
    High speed nylon ball retainer for greater strength and speed.
    Pre-lubricated with Speed Cream racing lubricant.
    Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible.

    Contents
    Set of 8 bearings
    Instructions
    Sticker

  • Sector 9 – Bearing Butter Lube

    $10.00CAD

    Help extend the life of your bearings while getting them up to tip-top speed with the Sector 9 Bearing Butter.

  • Bones Super Reds Bearings

    $37.99CAD

    Features
    Features Higher quality steel races, better quality and grade balls, and a superior surface finish.
    Single, non-contact, removable rubber shield for easy cleaning and less friction.
    High speed nylon ball retainer for greater strength and speed.
    Pre-lubricated with Speed Cream™ racing lubricant
    Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.

    Contents
    Set of 8 bearings
    Instructions
    Sticker

7. Lube… Don’t wanna spurge on bearings… a sample Skanunu is $2.50 and will last you the whole of GHF easy… or be a baller and get some of that Purple.

8. Helmet… why is a helmet #8? isn’t it mandatory? Well, then you should always have a helmet, right? If you’re blowing it with a cracked old piece of foo foo, or maybe just wearing a plastic hat, come get a certified helmet and protect your melon at GHF. Bring in the old one and save $15.

  • Predator – FR7 – Matte Blue

    $68.99CAD

    Size Chart:
    XS/S: 51cm to 56cm (20.1″ to 22.1″)
    M/L: 53cm to 58cm (20.9″ go 22.8″)
    XL: 56cm to 62cm (22.1″ to 24.4″)

    CPSC and CE-1078 Certified

  • Predator – FR7 – Levi Hawken

    $68.99 $53.99CAD

    Size Chart:
    XS/S: 51cm to 56cm (20.1″ to 22.1″)
    M/L: 53cm to 58cm (20.9″ go 22.8″)
    XL: 56cm to 62cm (22.1″ to 24.4″)

    CPSC and CE-1078 Certified

  • Triple 8 – Gotham – Cream Matte (Cream/Brown)

    $88.99CAD

    To ensure a perfect fit, measure the circumference of your head starting in the middle of your forehead and match it with the sizes below:

    XS/S 18.9 – 21.3 in (48 – 54 cm)
    S/M 21.7 – 22.8 in (55 – 58 cm)
    L/XL 23.2 – 24 in (59 – 61 cm)

9. Bushings… dial in your trucks and be ready to schmang. Having a well tuned shred machine will make your GHF all that snazzier.

  • Riptide – Krank Bushings – FatCone

    $12.99CAD

    Sold as Pair with Flat Washers and Sticker.

    Available Durometers: 84a (orange), 87a (white), 90a (green), 93a (purple), 96a (grey),

  • Powell Peralta Bones Hardcore Barrel Bushings

    $16.99CAD

    Bones only puts out the best. And with minds like Kevin Reimer behind the product, you know it was extensively tested. The hard insert reduces hanger play, which basically makes your trucks perform better in every way possible.  To gauge for consistent stability, anticipate to ride a softer durometer than your previous bushings. They are sized to fit all longboard trucks that matter.

    Here's what it says on the package, and they don't appear to be lying either:

    -Patented bonded-insert technology
    -More precise steering
    -Quicker response
    -No break-in period
    -More stability
    -The BEST bushings, period.

  • Riptide – Krank Bushings – Tall FatCone

    $14.99CAD

    Sold as Pair with Flat Washers and Sticker.

    Available Durometers: 84a (orange), 87a (white), 90a (green), 93a (purple), 96a (grey),

  • Riptide – APS Bushings – Chubby

    $12.99CAD

    Sold as Pair with Large Flat Washers & a Sticker

    Available Durometers: 67.5a (red), 70a (purple), 75a (green), 80a (orange), 85a (blue), 87.5a (pink), 90a (yellow), 92.5a (dark blue), 95a (dark red), 97.5a (dark green),

  • On Sale

    Khiro Bushings – Tall Cone

    $0.00$8.00CAD

    Like all KHIRO bushings, these ‘Tall Cone’ Bushings come in seven different durometers; Extra Soft White 73A, Mild Soft Orange 79A, Soft Blue 85A, Med Soft Red 90A, Hard Black 95A and Extra Hard Purple 98A.

    Note: The X-Soft White Bushings are 73-A hardness, designed for light discipline and lightweight skaters.

  • Orangatang – Nipples Bushings

    $17.99CAD

    Is it cold in here or are you just sporting some perky bushings? Stuff these chubby puppies into your trucks and get ready to bounce out of every carve with tons of energy and rebound.  Poured with our extra lively and energetic Randy Urethane, which we came upon while testing wheels but had slide characteristics that were a bit hmmmmm . . . premature?  Too eager for a wheel, but just excitable enough to squeeze between your washers.

    Sold as a set of four (4), including four thin and strong flat washers. Nipples are NOT recommended for every truck on the market, but they do work well with Paris, Tracker Fastracks and Randals (among others).

  • Orangatang – Moose Knuckles Bushings

    $18.99CAD

    JUICIER BOUNCE, TIGHTER PACKAGE.
    Crafted for quick turning response and smooth edge-to-edge transitions, Orangatang Knuckles are the ultimate high-energy bushing upgrade for carving, pumping, dancing, and freestyle longboarding.

    Orange = Soft
    Purple = Medium

    What’s in the box? Pack contains two insert barrel bushings, two gumdrop bushings, two large cup washers, and two small cup washers.

    LONGBOARD BUSHING SPECS
    Diameter: 0.95” (24.1 mm)
    Height (gumdrop): 0.64” (16.3 mm)
    Height (inset barrel) 0.59” (15 mm) barrel + 0.075” (1.91 mm) insert = 0.665” (16.9 mm) total
    Formula: Randy Thane
    Durometers: soft (orange, 87a), medium (purple, 90a)

    RECOMMENDED WEIGHT RANGES
    Soft: 65-190+ lbs / 29-86+ kg
    Medium: 130-230+ lbs / 59-104+ kg

  • Riptide – Krank Bushings – Tall Barrel

    $12.99CAD

    Sold as Pair with Sticker.

    Available Durometers: 84a (orange), 87a (white), 90a (green), 93a (purple), 96a (grey),

  • Riptide – Krank Bushings – Tall Chubby

    $14.99CAD

    Sold as Pair with Large Flat Washers and Sticker.

    Available Durometers: 84a (orange), 87a (white), 90a (green), 93a (purple), 96a (grey),

10. Flatspot Bucket Hat… It’s going to be sunny and hot and when you’re not wearing your helmet, you’re going to want to cover your head. Bucket hats are made for the job. Pro tip: Happy Hour sunglasses…

We will leave you with this video from one summer when Mischa, Slota, Aidan, Evan and Shane we drove to giants head and primarily skated everything else around it because the gate was closed.

 

ill

If you have any questions please feel free to shoot us an email at info@flatspotlongboards.com, message us on facebook, or call at 604 899 8937!

ENTER FULL STORE

Mischa Farivar
Latest posts by Mischa Farivar (see all)

Trackbacks and pingbacks

No trackback or pingback available for this article.