Subsonic skateboards has been dropping new shapes and updating old ones. The the latest rendition of the Subsonic Ruse is better than ever, with an epic throwback graphic.
The Subsonic Ruse is a symmetrical drop-through board with functional nose/tail kicks. This makes for a low riding height (nice for pushing), but also leaves the board completely functional for all and any flat land, fancy, dick around session shennanigans you might get distracted by along the way. The concave has a shape similar to a figure eight. It tapers in at the center of the board, but wraps along the cut outs towards the neck of the board and merge into a super subtle micro drop. Combined with rocker, it makes for a surprisingly comfy standing platform that is totally suitable for dancing. This board isn’t just maple either, it has fibreglass embedded between the veneers, allowing for a lighter, stronger and longer lasting board!
These brand new 64mm FreeRides with our stone ground finish will leave golden lines of thane right out of the box! They feature our wide “FreeRide Core” that provides extra support to keep them amazingly stable and smooth while sliding. They also feature our legendary classic 81a amberthane, which results in a smooth, fast and drifty wheel that won’t let you down. Set these up on your favorite small-sized freeride or cruising board and you’ll be one very happy camper.
– Precision 8mm axle holes
– .4045″ built in spacers
– .5mm built in speedrings
– Green rubber seals to keep dirt and debris on the outside of the bearing.
– Lubed with Custom Nanoceramic Grease
-The unique feature of the lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.
-The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.
-Extremely low water washout
-Corrosion on the inside of the bearing is nearly eliminated.
Sold in sets of 8 bearings.