- No products in the cart.
Shop Longboards and Skateboards Online
Opera – Nassim Blood Rose EX7 Deck – 8.0in x 31.6in
$99.99CADOpera Skateboards – Nassim Blood Rose EX7 Deck – 8.0in x 31.6in
Epoxy 7 Pop-Slick Construction
7-ply 100% North American Maple with Epoxy Glue
Blue foil
Embossed graphic detail
Individually Pressed
8.0 x 31.6 WB: 14.0
Medium Concave/ Medium Kick
Stronger than industry 7-ply. Strong pop. Long deck life.
Rocket – Spear – Deck
$420.00CADRocket Longboards – Spear – Downhill Skateboard Deck
The Spear is incredibly fast and versatile.
The absolute quiver killer
Our idea of an absolute quiver killer. A mellow tub concave without many gimmicks provides the necessary grip without being restrictive. No W, no flares, no rocker – just pure topmount freedom paired with modern specs and a functional kicktail. Use your board for downhill and freeride, as a daily rider, and even on the pump track. And all without making any compromises.SPECIFICATIONS:
LENGTH – 33.5″ / 84 cm
WIDTH – 8.8″ / 22 cm
WHEELBASE – 17.5″ – 20″ / 44.5 – 50.8 cm
CONCAVE – Mellow tub concave
MATERIAL – SFI-certified Canadian maple, Carbon fiber, Glass fiber, Embossed ABS topsheet
Independent Trucks – Cross Bolts – 7/8in Black/Red Phillips
$4.99CADIndependent Trucks – Cross Bolts – 7/8in Black/Red Phillips
Independent Genuine Parts hardware is specified to the highest standards. Each set contains 6 black bolts and 2 red bolts. Genuine Parts Phillips hardware features cross logo heads, full size nylon lock nuts, full size bolt heads with Cross insignia, and extended unthreaded shafts for minimal board damage. Available in black, silver, gold and red. 1.25″ and & 1.5″. Updated packaging features 100% recyclable bolt bags.
Independent – Original Stage 4 Soft Bushings – 90a Red
$11.99CADIndependent – Original Stage 4 Soft Bushings – 90a Red Cushions
Independent Original Cushions feature custom formulated ultra high rebound Genuine Parts urethane for superior stability and are sized perfectly to fit Independent Stages 1 through 7. Package comes with 2 top & 2 bottom cushions and cup washers. Available in Super Soft White 88a, Soft Red 90a, Medium Blue 92a, and Hard Black 94a.
-Ultra high rebound urethane formula.
-Properly sized to fit Independent trucks Stage 1-7.
-Soft 90a (Red).
-Standard Cylinder shape.
Mob – Natas Panther x Santa Cruz 11in. – Griptape
$21.99CADMob Skateboard Griptape – Natas Panther x Santa Cruz 11in. – Grip tape Sheet
11″ x 33″
The #1 Griptape Choice of the Pros!
MOB Grip features:
-Hundreds of barely-visible perforations that allow air to escape for a bubble-free application
-Exclusive silicon-carbide grit binding process for grip that will not wear out
-High-strength, waterproof, tear-proof backing that trims cleanly every time
-Super sticky adhesive that won’t peel in extreme heat or coldNo bubbles, no troubles. MOB Grip is The Grippiest.
Rocket – Radigon 31″ – Deck
$420.00CADRocket Longboards – Radigon 31″ – Downhill Skateboard Deck
The Radigon 31″ is perfect for riders who like a short wheelbase but still want a certain width. Because of their large feet or simply because it’s extremely comfortable. Ultra-skinny trucks aren’t the answer here. The sweet spot here is around 130-140 mm. Combined with the short wheelbase, the board is maneuverable and lively, yet still slides when it should. Perfect for a slide session with your buddies. And yet it’s also there when you need to go fast.
SPECIFICATIONS:
LENGTH – 31″ / 78.5 cm
WIDTH – 9.2″ / 23.2 cm
WHEELBASE – 19″ – 21.5″ / 48.2 – 54.6 cm
CONCAVE – Mellow elliptical concave
MATERIAL – SFI-certified Canadian maple, Carbon fiber, Glass fiber, Embossed ABS topsheet
Independent – Trucker BTG Summit Printed Camo / Black – One Size
$39.99CADIndependent – Trucker BTG Summit Printed Camo / Black – One Size Snapback Hat
Ride the best and rep the best with the latest Independent Trucks apparel and accessories.
The Independent BTG Summit Printed men’s high profile structured, foam front mesh trucker hat features center front screenprint, loop label at rear snapback adjuster and custom interior taping.
Product Features
Men’s structured, foam front mesh trucker hat
High-profile fit
Center front Independent BTG Summit screenprint
Loop label at rear snapback adjuster
60% Cotton/40% Polyester
Custom interior taping
Independent Trucks – Built to Grind.
Independent Trucks – Cross Bolts – 1in Silver Phillips
$4.99CADIndependent Trucks Genuine Parts Cross Bolts 1in Silver Phillips Hardware
Independent Genuine Parts hardware is specified to the highest standards. Each set contains 6 black bolts and 2 red bolts. Genuine Parts Phillips hardware features cross logo heads, full size nylon lock nuts, full size bolt heads with Cross insignia, and extended unthreaded shafts for minimal board damage. Available in black, silver, gold and red. 1.25″ and & 1.5″. Updated packaging features 100% recyclable bolt bags.
Powell Peralta – Vallely Lightning Bolt Gold Foil Flight Shape 308 K26 – 8.75in x 32.33in
$159.99CADPowell Peralta – Mike Vallely Lightning Bolt Gold Foil Flight Shape 308 K26 – 8.75in x 32.33in
FLIGHT™ Decks are:
Thinner – as thin as your phone
Stronger – more than twice as strong in our tail break tests
Longer lasting – The epoxy infused, fiber reinforced structure of the Flight deck is extremely resistant to breaking, and this structure gives them “everlasting pop” that doesn’t fade as your deck slowly wears.
Ollies higher because of greater rebound and snap.
Team testing suggests that Flight decks will last several times longer than a 7-ply, making them a great value as well as a superior performing skateboard.*Remember, skateboards are meant to be ridden, not run over by a car or truck.
Deck Shape 308
Deck Construction FLIGHT®
Deck Concave K26
Deck Wheelbase 14.5″
Deck Length 32.33″
Deck Width 8.75″
Deck Nose 6.94″
Deck Tail 6.69″
Independent – Original Stage 4 Super Soft Bushings – 88a White
$11.99CADIndependent – Original Stage 4 Super Soft Bushings – 88a White Cushions
Independent Original Cushions feature custom formulated ultra high rebound Genuine Parts urethane for superior stability and are sized perfectly to fit Independent Stages 1 through 7. Package comes with 2 top & 2 bottom cushions and cup washers. Available in Super Soft White 88a, Soft Red 90a, Medium Blue 92a, and Hard Black 94a.
-Ultra high rebound urethane formula.
-Properly sized to fit Independent trucks Stage 1-7.
-Super Soft 88a (White).
-Standard Cylinder shape.
Mob – Creature Logo Outline 10in. – Griptape
$21.99CADMob Skateboard Griptape – Creature Logo Outline 10in. – Grip tape Sheet
10″ x 33″
The #1 Griptape Choice of the Pros!
MOB Grip features:
-Hundreds of barely-visible perforations that allow air to escape for a bubble-free application
-Exclusive silicon-carbide grit binding process for grip that will not wear out
-High-strength, waterproof, tear-proof backing that trims cleanly every time
-Super sticky adhesive that won’t peel in extreme heat or coldNo bubbles, no troubles. MOB Grip is The Grippiest.
Rocket – Radigon 34″ – Deck
$420.00CADRocket Longboards – Radigon 34″ – Downhill Skateboard Deck
The Radigon 34″ is the modern interpretation of the good old freeride plank. It’s big, but not too big. It’s also wide, but not too wide. For those who prefer 160-180 mm trucks rather than narrow ones. With the various wheelbase options, the board can be ideally adapted to different riding styles. From fast descents to chill slides, it’s got it all.
SPECIFICATIONS:
LENGTH – 34″ / 86 cm
WIDTH – 9.8″ / 24.9 cm
WHEELBASE – 21.5″ – 24″ / 54.6 – 61 cm
CONCAVE – Mellow elliptical concave
MATERIAL – SFI-certified Canadian maple, Carbon fiber, Glass fiber, Embossed ABS topsheet
Powell Peralta – Frankie Hill Bulldog Enamel – Lapel Pin
$14.99CADPowell Peralta – Frankie Hill Bulldog Enamel – Lapel Pin
About the Frankie Hill Bulldog Art:
Santa Barbara local Frankie Hill was known for his “go for it” attitude, especially when filming videos. He was featured in Public Domain but Ban This features his breakout part, one minute and 38 seconds of what many today consider proof of Hill’s pioneering stunt work at big rails and huge gaps. After Ban This, Hill received bags of fan mail asking when he’s going to turn pro. The timing was good, too, as a spot opened up with Mike Vallely’s departure. Hill started riding Vallely’s shape, modified with a bigger nose, and on a vacation with Hastings, he poached a bulldog logo from an Amsterdam “coffee shop” and made it his first pro graphic. It was illustrated by Sean Cliver in 1990.
Pin Features:
1 3/8″ tall die struck soft enamel lapel pin
one military clutch