- No products in the cart.
Shop Longboards and Skateboards Online
Riptide – Independent / Bennett Pivot Cups – 96a
$16.99CADRiptide Independent Bennett Skateboard Trucks Pivot Cups 96a
Sold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aRiptide Gullwing Sidewinder Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide's exclusive Internally Lubricated WFB Urethane in 96aRiptide Gullwing Reverse & Charger II Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aRiptide Caliber Precision Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aRiptide Caliber II & III Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aRiptide – Bear Kodiak & Gen 6 Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide's exclusive Internally Lubricated WFB Urethane in 96aRiptide – Bear Grizzly 5.01+/Precision Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aRiptide Atlas Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aRiptide – Polar Bear Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aRiptide – Paris Street Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aRiptide Independent Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aRiptide Gullwing Pro Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aRiptide Ace Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aRiptide Aera K5 Pivot Cup – 96a
$16.99CADSold as Pair. Specifically for Aera K5.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aVenom – Bushings – Tall Kegs (HPF)
$16.99CADVenom – Bushings – Tall Kegs (HPF)
The “keg” bushing is designed to give more progressive resistance and rebound than a barrel, but without the hard stop of a normal stepped bushing. The curved side profile provides extra meat while still fitting most bushing seats. Ideal for use on the board-side, especially if you’re looking for a softer-feeling setup without losing stability. Just think of it as a barrel, but with that thicky-thicc-thicc as Nelly would say. Only compatible with Tall-bushing trucks.
Made In USA
HPF Formula:
78A – Blue
81A – Orange
85A – Yellow
87A – Purple
90A – Red
93A – Green
95A – Glow in the Dark
97A – PinkDIMENSIONS:
Height: ~18.70mm
Step Diameter (into bushing seat): ~25.10mm
Max Diameter (out of bushing seat): ~31.40mm
Inner Diameter: ~9.50mmSeismic – Skid Plates Round White – 180mm
$15.99CADSeismic Skate High-Performance Ergonomic Skid Plates 180mm Round White
Seismic Skates 180mm Round Skid Plates in White.
– 180mm (7.1″) Round: Fits many Old School Pool / Park decks and modern DH / Freeride decks with tails.
– 8mm (5/16″) thick. Packaged with mounting instructions and hardware (rivet nuts and machine screws).Seismic – Skid Plates Round Black – 180mm
$15.99CADSeismic Skate High-Performance Ergonomic Skid Plates 180mm Round Black
Seismic Skates 180mm Round Skid Plates in Black.
– 180mm (7.1″) Round: Fits many Old School Pool / Park decks and modern DH / Freeride decks with tails.
– 8mm (5/16″) thick. Packaged with mounting instructions and hardware (rivet nuts and machine screws).Seismic – Skid Plates Round Black – 150mm
$15.99CADSeismic Skate High-Performance Ergonomic Skid Plates 150mm Round Black
Seismic Skates 150mm Round Skid Plates in Black.
– 150mm (5.9″) Round: Fits most medium / wide Street decks with “round” ends.
– 8mm (5/16″) thick. Packaged with mounting instructions and hardware (rivet nuts and machine screws).Seismic – Skid Plates Round White – 150mm
$15.99CADSeismic Skate High-Performance Ergonomic Skid Plates 150mm Round White
Seismic Skates 150mm Round Skid Plates in White.
– 150mm (5.9″) Round: Fits most medium / wide Street decks with “round” ends.
– 8mm (5/16″) thick. Packaged with mounting instructions and hardware (rivet nuts and machine screws).Seismic – Skid Plates Egg White- 140mm
$15.99CADSeismic Skate High-Performance Ergonomic Skid Plates 140mm Egg White
Price is for one (1) Skid Plate.
– 140mm (5.51″) Egg: Fits many modern Longboard Freestyle decks and most medium / wide Street decks with “egg”-shaped ends.
– 8mm (5/16″) thick. Packaged with mounting instructions and hardware (rivet nuts and machine screws).Seismic – Skid Plates Egg Black- 140mm
$15.99CADSeismic Skate High-Performance Ergonomic Skid Plates 140mm Egg Black
Price is for one (1) Skid Plate.
– 140mm (5.51″) Egg: Fits many modern Longboard Freestyle decks and most medium / wide Street decks with “egg”-shaped ends.
– 8mm (5/16″) thick. Packaged with mounting instructions and hardware (rivet nuts and machine screws).Seismic – Defcon Standard .60 Short Barrel – Bushings
$15.99CADSeismic Skate – Defcon Standard Short Barrel 0.60-inch (15mm) – Bushings
Seismic® Defcon™ Barrel Bushings
Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
Available in five (5) color-coded durometers and three (3) precision-fit heights. (Additional duros coming early 2023.)
Price is for a single pair of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.A major step forward in bushing performance…
• Deeper lean and truer, more fluid steering with less lateral hanger slop!
• Highly-energetic yet smooth and controlled return-to-center
• Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
• Smoother, more linear resistance profile – Consistent feel • Advanced controlFine-tuned dimensions for high-performance fit!
• Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
• Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
• Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
• Short 0.60-inch (15mm): Optimal height both Board-Side (BS) and Road-Side (RS) for many modern longboard trucks, especially those assembled with BS washers. (e.g., Bear, Caliber, Paris, Dont Trip Poppy / Slalocybin)73A – Cloud White
77A – Sunray
81A – Sky Blue
84A – Bubblegum
87A – Mango
90A – Mint
93A – Grape
97A – MidnightNote: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.
Venom – Rogue Pivot Tubes Grey Graphite – 93a
$15.99CADVenom – Rogue Pivot Tubes Grey Graphite – 93a
Introducing the new Pivot Tubes for Rogue Trucks by Venom. The same perfect urethane blend of rebound and dampening found in your Venom HPF bushings and pivot cups, now in a pivot tube shape geared for Rogues.
With Rogue trucks, we found the ‘cupped’ end of the pivot to be unnecessary and redundant. With Rogue’s insert bushing technology, the hanger has zero vertical play, eliminating the need for a pivot cup. The new pivot tubes give the same precise feel and turn, but make removing your hangers easier and more convenient. Now available in the same 90A (red), 93A (graphite impregnated), and 97A (pink).
The softer duros dampens road vibration for a smoother ride when cruising and carving. For higher performance freeriding, downhill, and racing, the harder duros will make your trucks feel more responsive, precise, and accurate so you can take the lines you need.
Sold as a Pair.
