- No products in the cart.
Shop Longboards and Skateboards Online
- You cannot add "Santa Cruz - Classic Dot White/Red Socks 2 Pack - Socks" to the cart because the product is out of stock.
Flip Strips – Concave Implants
$14.99CADFlip Strips – Skateboard Griptape Concave Implants
Slap Flip Strips on the top of your deck and add your grip for more concave and extra control. You’ll get a consistent flip trick experience and far better board feel from day one. Plus, it’s easy to apply, so you’ll be innovating right away!
Flip Strips set of 2
White with peel off adhesive backing
11 inches long x 1/4 inch wide
Stick Flip Strips on the top of your deck, before you grip your deck.
designed to give more concave and extra control.
Seismic – Fullspin Precision Profiled XT Steel – Bearing Spacers
$14.99CADFullspin™ Precision-Profiled XT™ Steel Spacers
Premium 0.400-inch steel bearing spacers. Fit standard 8mm axles only.
Fullspin’s unique Precision-Profiled XT (Extra-Tough) Steel Spacers have broad flanged ends that square up against Classic (non-Built-In) inner ring surfaces with up to 67% more contact area – powering unprecedented Classic alignment precision and stability.
Design levels and steadies all working components of seated bearings far more precisely and stably than Classic spacers from other brands – which are typically rough-cut from thin-walled, easily-bent iron or aluminum, with oversized bores that rock on axles.
This is hands-down the most advanced Classic bearing alignment tech ever seen in the skate world, and it unleashes truly exceptional paired performance. Synergizes with working features in all high-quality Classic bearings* to maintain exceptionally consistent wheel contact and grip; support extremely predictable slide performance; and noticeably extend both wheel and bearing life.
Precision-machined from premium bearing steel with advanced heat-treatment for unmatched strength and toughness.
Spacer width set to extra-strict 0.400-inch tolerance, to support highly accurate positioning of paired bearings inside finer wheels with well-engineered hubs.
Radius reduced to bare minimum on spacer edges, for fuller contact and more stable alignment at bearing interfaces. Bore specs dialed to maintain exceptional straightness on finer axles.
* For best results, use with Seismic® Fullspin Classic bearings, which have extra-wide inner ring contact surfaces that exactly match the profiled spacer ends.
Powell Peralta – Cab Street Dragon Yellow Enamel 1.3125in – Lapel Pin
$14.99CADPowell Peralta – Cab Street Dragon Yellow Enamel 1.3125in – Lapel Pin
About the Cab Street Artwork:
In 1987 street skating was rapidly gaining popularity. Steve Caballero not only excelled at vert skating but was a top contender on the “Street-Style” circuit. Powell-Peralta decided to introduce an additional Cab deck model specifically designed for street. Artist V.C. Johnson created a new dragon graphic with a bats & bones background. Cab’s name was also created in the bat shape since Cab was into Batman at the time. The Powell-Peralta logo was made using the Animal Chin font, also a sign of the times.
Originally Released: 1987
Artwork by: Vernon Courtlandt Johnson
Features:
1.3125″ Tall die-struck soft enamel lapel pin with dyed black metal
Two military clutches on back
Powell Peralta – Ripper Glow In The Dark Enamel 1.175in – Lapel Pin
$14.99CADPowell Peralta – Ripper Glow In The Dark Enamel 1.175in – Lapel Pin
About the Ripper Artwork:
Arguably the most iconic skateboard graphic of all time, “The Ripper” was illustrated in 1983 by legendary Powell-Peralta artist V.C. Johnson. Originally the graphic was used as a “Bones Sold Here” dealer window sticker. Next, the artwork found it’s way onto t-shirts and eventually decks. The Ripper graphic has stood the test of time and has been a staple of the Powell-Peralta line for over 30 years.
Originally Released: 1983
Artwork by: Vernon Courtlandt Johnson
FEATURES:
1.175″ Wide soft enamel pin
Raised Black Nickel Metal
Glowin-the-dark enamel skeleton
One military clutch
Powell Peralta – Andy Anderson Skull Enamel 1.625in – Lapel Pin
$14.99CADPowell Peralta – Andy Anderson Skull Enamel 1.625in – Lapel Pin
About the Anderson Skull Graphic:
Andy Anderson is one of a kind. One of the most interesting and open minded skaters that you could ever meet. From free style skateboarding to big rails, vert ramps, and bowls, Andy has something for it all. The Andy Anderson Skull graphic was designed by Vernon Courtlandt Johnson in 2019, when became Andy’s first pro Powell-Peralta graphic.
Released: 2019
Artwork By: Vernon Courtlandt Johnson
Features:
1.625″ tall die struck soft enamel lapel pin
Two military clutches
Powell Peralta – Cab Street Dragon Green Enamel 1.3125in – Lapel Pin
$14.99CADPowell Peralta – Cab Street Dragon Green Enamel 1.3125in – Lapel Pin
About the Cab Street Artwork:
In 1987 street skating was rapidly gaining popularity. Steve Caballero not only excelled at vert skating but was a top contender on the “Street-Style” circuit. Powell-Peralta decided to introduce an additional Cab deck model specifically designed for street. Artist V.C. Johnson created a new dragon graphic with a bats & bones background. Cab’s name was also created in the bat shape since Cab was into Batman at the time. The Powell-Peralta logo was made using the Animal Chin font, also a sign of the times.
Originally Released: 1987
Artwork by: Vernon Courtlandt Johnson
Features:
1.3125″ Tall die-struck soft enamel lapel pin with dyed black metal
Two military clutches on back
Powell Peralta – Bones Brigade Series 12 Enamel 1.675in – Lapel Pin
$14.99CADPowell Peralta – Bones Brigade Series 12 Enamel 1.675in – Lapel Pin
Bones Brigade Series 12, collectible Bones Brigade lapel pin.
Randomly assorted backer cards.
1.675” wide with two military clutches.Ten different backing cards, with ten different sayings from The Search For Animal Chin
HAVE YOU SEEN HIM?
EVER DONE A TAIL DROP?
MAPS TO THE SKATERS HOMES
HE’S GOT HIS OWN MILK CARTON
DON’T EVER DO A NOSE PICKER WITH A COPER
WASN’T EVEN A BAD SLAM, DON’T WORRY
DINK, DANKED, SKADACTD. DUFFD, BANKED.
BUNSON OVER THE JUNSON
LOOK OUT FOR THE BUTTON IN THE GLOVE BOX
WELCOME TO THE BLUE TILE LOUNGE
Bones – Hardcore Bushings – Black Pack
$14.99CADFEATURES
- There is no break-in period. Just put them in, adjust and skate.
- Your trucks will be more responsive.
- Increased truck performance
- Improves your skating experience.
- Your turns will be smooth and positive, not floppy or rigid.
- 3 Hardnesses: Hard Bushing: 96A, Medium Bushing: 91A, Soft Bushing: 81A
