- No products in the cart.
MOB – Medium Coarse
CADCAD
Not SUPER coarse…but not regular grip either. A good medium for a hybrid board, or a longer double kick.
Share on:
Additional information
Additional information
Weight 1 lbs Dimensions 12 × 12 × 1 in
Related Products
Bones – Reds – Bearings
$29.99CADBones Bearings – Reds – Skateboard Bearings
Single, non-contact, removable rubber shield for easy cleaning and less friction
High speed Nylon™ ball retainer for greater strength and speed
Pre-lubricated with Speed Cream™ racing lubricant
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible
Bearing Spacers – Standard 8mm Set of 4 – Raw
$4.99CADBearing Spacers – Standard 8mm Set of 4 – Raw
Bearing Spacers sit between each bearing inside your wheel to provide the correct spacing and support for each bearing set.
Size: “Standard” 8mm x 10mm
Set of 8
Steel** Use with Standard 8mm Speed Rings for the best results.
Black Panhead Hardware
$4.99 – $6.99CADBlack Panhead Skateboard Longboard Mounting Hardware
Varying lengths, select the one that suits your setup needs.
FEATURES
Phillips
Black and sleek
Pan head top sits above the top ply.
Ideal for Drop Through Mounting.
Holds trucks on your board.
Comes in 1″, 1.25″, 1.5″, 1.75″ and 2″Sold as a set of 8 Nuts and Bolts.
**Panhead or Buttonhead can be used interchangeably. Pan head sits slightly taller with a defined vertical edge before the round dome head, whereas button head is more of a flush dome with no defined vertical edge. Both have flat undersides that spreads clamping force very well, rather than sinking in, making them ideal for wood and composite decks, and are required for drop through mounting where the hardware will need to have a flat interface with the truck baseplate.
Zealous – Ceramic Precision built In – Bearings
$39.99CADZealous downhill Ceramic precision Spaced longboard Bearings
Ceramic Balls
-Ceramic balls are lighter, stiffer, smoother and naturally corrosion resistant. This means we can use a lower viscosity lubricant which makes them fast right out of the tube.
– Precision 8mm axle holes
– .4045″ built in spacers
– .5mm built in speedrings
– Strengthened Nylon Ball Retainers
– White rubber seals to keep dirt and debris on the outside of the bearing.
– Lubed with Custom Nanoceramic Grease
-The unique feature of our lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.
-The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.
-Corrosion on the inside of the bearing is nearly eliminated.Sold in sets of 8 bearings.
Zealous – Classic Steel Precision Built In – Bearings
$21.99CADZealous – Classic Steel Precision Built In – Bearings
Feature:
– Steel Balls
– Precision 8mm axle holes
– .4045″ built in spacers
– .5mm built in speedrings
– Green rubber seals to keep dirt and debris on the outside of the bearing.
– Lubed with Custom Nanoceramic Grease
-The unique feature of the lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.
-The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.
-Extremely low water washout
-Corrosion on the inside of the bearing is nearly eliminated.Sold in sets of 8 bearings.