1.25 Inch

  • Loaded – Counter Sunk – Hardware

    $9.99CAD

    Loaded – Counter Sunk – Hardware

    Got that sinking feeling again? We’ll only make it worse. Loaded countersunk (flat head) hardware. The strongest bolts in the world. Period.

    Based on research into steel technology and tons of testing, we’ve built the strongest bolts ever. These things don’t break. Guaranteed.

    We’ve got little bumps (debossed or embossed, we’re not sure which is which) on top to further stick you to your deck. Guaranteed to smell like grease.

    Our hardware comes with a hex key and is available in three sizes!

    1”
    1.25”

    What’s in the box? 8 bolts, 8 nuts, and a wrench.

    Packaging may vary.

    See Options

  • Loaded – Button Head – Hardware

    $9.99CAD

    Loaded – Button Head – Hardware

    The strongest bolts in the world. Period.

    Based on research into steel technology and tons of testing, we’ve built the strongest bolts ever. These things don’t break. Guaranteed.

    These button head bolts integrate the washer into the bolt itself in order to reduce the height of the bolt heads while still distributing load pressure.

    Our hardware comes with a hex key and is available in three sizes!

    1”
    1.25”
    1.5″
    What’s in the box? 8 bolts, 8 nuts, and a hex key to tighten them down.

    Packaging may vary.

    See Options

  • Rogers Bros – 1.25in & 1.5in Bridge Bolts – Mounting Hardware

    $29.99CAD

    Rogers Bros Precision Truck Mounting Hardware Bridge Bolts

    Rogers Bros Hardware will hold your trucks on straighter, last longer, and don’t require a phillips or allan key to install or tighten. This hardware will last you through several set ups!

    Stays put. No BS.
    Truck Mounting Hardware (mounts 2 tucks) :

    Say goodbye to screwdrivers and hex keys when mounting your trucks. “Dogbone” shape spreads the load from the fasteners to a larger area to reduce deforming/splitting your deck around the mounting holes. Trucks go on straighter and truer due to precise dimensions and tolerances. 6061-T6 Aluminum with high strength steel studs.

    Specifications
    1.25” Hardware set
    1.5” Hardware set

    Comes with enough for one complete board.

    See Options

  • Black Panhead Hardware

    $4.99 – $6.99CAD

    Black Panhead Skateboard Longboard Mounting Hardware

    Varying lengths, select the one that suits your setup needs.

    FEATURES
    Phillips
    Black and sleek
    Pan head top sits above the top ply.
    Ideal for Drop Through Mounting.
    Holds trucks on your board.
    Comes in 1″, 1.25″, 1.5″, 1.75″ and 2″

    Sold as a set of 8 Nuts and Bolts.

    **Panhead or Buttonhead can be used interchangeably. Pan head sits slightly taller with a defined vertical edge before the round dome head, whereas button head is more of a flush dome with no defined vertical edge. Both have flat undersides that spreads clamping force very well, rather than sinking in, making them ideal for wood and composite decks, and are required for drop through mounting where the hardware will need to have a flat interface with the truck baseplate.

    See Options

  • Black Countersunk Mounting Hardware

    $4.99CAD

    Black Countersunk Skateboard Longboard Hardware

    Varying lengths, select the one that suits your setup needs.

    FEATURES
    Phillips.
    Black and sleek.
    Hardware sinks flush with top ply of your board.
    Holds trucks on your board.
    Comes in 1″, 1.25″, 1.5″, 1.75″ and 2″.

    Sold as a set of 8 Nuts and Bolts.

    See Options