- No products in the cart.
Shop Longboards and Skateboards Online
Orangatang – Nipples Bushings
$26.99CADIs it cold in here or are you just sporting some perky bushings? Stuff these chubby puppies into your trucks and get ready to bounce out of every carve with tons of energy and rebound. Poured with our extra lively and energetic Randy Urethane, which we came upon while testing wheels but had slide characteristics that were a bit hmmmmm . . . premature? Too eager for a wheel, but just excitable enough to squeeze between your washers.
Sold as a set of four (4), including four thin and strong flat washers. Nipples are NOT recommended for every truck on the market, but they do work well with Paris, Tracker Fastracks and Randals (among others).
MOB – Black 11″ Coarse Griptape – Roll
$4.75 – $26.00CADMob Grip features:
– Hundreds of barely-visible perforations that allow air to escape for a bubble-free application
– Exclusive grit binding process for grip that will not wear out
– High-strength, waterproof, tear resistant backing that trims cleanly every time
– Super sticky adhesive that won’t peel in extreme heat or cold
Tail Devil – Spark Skid Plates – Black
$25.99CADOriginal Tail Devil Skateboard Spark Skid Plates Sparking Flint Black
Tail Devil skateboard spark plates are back and available for purchase now. Spark it up!
One Tail Devil.
Color: Black
Size: 5.7cm x 3.8cm x 1.27cm
Weight: 40g
Material: Plastic Acrylic
Includes: One Tail Devil 3M Mounting Tape, 2 Philips Screws
Bones – Bearings Puller -Tool
$25.99CADBones Bearings Puller Tool
Bones Bearings bearing tool. It acts as both a bearing press and a puller. It works with 8mm bearings and for the 90% of people not using spacers in their wheels. It is designed to press the bearings putting only force on the inner race so you wont dent your shields. Ball detent technology and small enough to fit in your pocket and make it your keychain.
Tail Devil – Spark Skid Plates – Red
$25.99CADOriginal Tail Devil Skateboard Spark Skid Plates Sparking Flint Red
Tail Devil skateboard spark plates are back and available for purchase now. Spark it up!
One Tail Devil.
Color: Red
Size: 5.7cm x 3.8cm x 1.27cm
Weight: 40g
Material: Plastic Acrylic
Includes: One Tail Devil 3M Mounting Tape, 2 Philips ScrewsMOB – Black 10″ Coarse Griptape – Roll
$4.25 – $25.00CADMob Grip features:
– Hundreds of barely-visible perforations that allow air to escape for a bubble-free application
– Exclusive grit binding process for grip that will not wear out
– High-strength, waterproof, tear resistant backing that trims cleanly every time
– Super sticky adhesive that won’t peel in extreme heat or cold
Red Dragon – RDS Card Holder Genuine Leather – Wallet
$24.99CADRed Dragon – RDS Card Holder Genuine Leather – Wallet
This RDS CARD HOLDER GENUINE LEATHER has more than the basic features: made of luxurious black 100% genuine leather, it also has a side pocket, and four credit card slots to keep your most important cards secure. Show off RDS’ signature debossed logo make sure to keep your essentials safe and organized with this classic card wallet!
Seismic – Hollow Puck Risers – Large Hex
$24.99CADSeismic Skate – 10mm Hollow Puck Risers – Large Hex
LARGE HEX: Precision fit with Seismic Premium Extra-Hard pucks (regular / non-flinted). Also compatible with many oval and rectangular pucks. 3.5″ / 88.9mm long by 3.1″ / 78.7mm wide. Central hollow 1.27″ / 32.3mm long by 1.13″ / 28.7mm wide
Also available in Standard HEX and ROUND.
Element – Trail Tri-fold Black – Wallet
$24.99CADElement – Trail Tri-fold Black – Wallet
The Trail tri-fold wallet by Element features one main bill slot, three card slots, and one zippered coin pocket. An exterior D ring loop and RFID theft prevention lining complete the design. Made from 100% nylon. Size: 3.9″ x 5.1″
City Blights – Volume 4: The Advertising Issue – Magazine
$24.99CADCity Blights Magazine, Volume 4: The Advertising Issue. Created in the Spring of 2017, this magazine is 100% fake ads: all filler, no killer. The New Yorker this is not, look elsewhere for 3000 word expository articles on the joys of banality. But if snark and sillyness is what you seek, boy howdy do we have the publication for you.
Seismic – Hollow Puck Risers – Round
$24.99CADSeismic Skate – 10mm Hollow Puck Risers – Round
ROUND
Fits most round pucks, including Seismic Classic blue. Lightweight and durable. Unique beveled central hollow saves weight, adds strong fingerhold to pull riser off worn puck.
Outer diameter 3.25″ / 82.5mm; hollow inner diameter 1.18″ / 30mm. 10mm thick.
Seismic – Hollow Puck Risers – Standard Hex
$24.99CADSeismic Skate – 10mm Hollow Puck Risers – Standard Hex
Standard HEX
Precision fit with Seismic Premium Extra-Hard Flinted pucks. Hex shape lets you clock puck-and-riser to preferred hand mobility zone. Outer diameter 3.25″ / 82.5mm. Central hollow diameter 1.18″ / 30mm.Also available in Large HEX and ROUND.
Triple 8 – Wristsaver II Wrist Guards
$24.99CADTriple 8 Eight NYC Protective Gear Wristsaver II Wrist Guards
Easy on, easy off.
Get classic Wristsaver protection, support and padded comfort with the added bonus of our single strap, Slide-On design. No matter how hard you skate, putting on and taking off the Wristaver II is super easy.
- Tough, 4-way stretch nylon mesh provides a snug fit
- High-density, impact-resistant molded ABS splints on front & back for support
- Shock absorbing EVA foam between support splints & wrist for cushioning
Bones Reds Bearings
$24.99CADSingle, non-contact, removable rubber shield for easy cleaning and less friction
High speed Nylon™ ball retainer for greater strength and speed
Pre-lubricated with Speed Cream™ racing lubricant
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possibleMOB – Black 9″ Coarse Griptape – Roll
$4.00 – $24.00CADThe #1 griptape choice of professional skateboarders.
Mob Grip features:
– Hundreds of barely-visible perforations that allow air to escape for a bubble-free application
– Exclusive grit binding process for grip that will not wear out
– High-strength, waterproof, tear resistant backing that trims cleanly every time
– Super sticky adhesive that won’t peel in extreme heat or cold
Seismic – 10-Degree Angled Wedges – Risers
$23.99CADSeismic Skate – 10-Degree Angled Wedges – Truck Risers
Precision-Machined • Ultra-Low Profile • Easy to Stack!
Pack of one (1) 10-degree Riser
Packaged in pair of two (2) 10-degree Risers, with an advanced feature set never before seen in combination…
Advanced feature set never before seen in combination:
• Thin ends reduced to 0.5mm-thickness for lowest-possible profile and minimum impact on truck height.
• Mounting hole dimensions highly optimized for easy stacking. No more bent bolts from riser hole misalignment!*
• Biomimetic “honeycomb” structure maximizes support with minimal material.
• CNC-machined from tough composite with superior dimensional stability. Highly resistant to deformation from extreme loads and impacts.
• Drilled for Old School mounting hole pattern, but accommodates New School hole pattern, too.
