- No products in the cart.
Search results: “venom”
Venom – Rogue Pivot Tubes Grey Graphite – 93a
$15.99CADVenom – Rogue Pivot Tubes Grey Graphite – 93a
Introducing the new Pivot Tubes for Rogue Trucks by Venom. The same perfect urethane blend of rebound and dampening found in your Venom HPF bushings and pivot cups, now in a pivot tube shape geared for Rogues.
With Rogue trucks, we found the ‘cupped’ end of the pivot to be unnecessary and redundant. With Rogue’s insert bushing technology, the hanger has zero vertical play, eliminating the need for a pivot cup. The new pivot tubes give the same precise feel and turn, but make removing your hangers easier and more convenient. Now available in the same 90A (red), 93A (graphite impregnated), and 97A (pink).
The softer duros dampens road vibration for a smoother ride when cruising and carving. For higher performance freeriding, downhill, and racing, the harder duros will make your trucks feel more responsive, precise, and accurate so you can take the lines you need.
Sold as a Pair.
Venom – Cannibals – 72mm x 78a
$102.99CADVenom Wheels – Cannibals – 72mm x 78a – Downhill Longboarding
The 72mm Cannibal made Venom wheels a household name with its winning combination of durability, grip, and smooth controllable slides. Updated with the new Cobra Core, it’s now even better. More support means better roll speed, more even wear, and super crisp hook up. The next step for a great all-around wheel.
Made In USA
Venom – Cannibals – 76mm x 78a
$109.99CADVenom Wheels – Cannibals – 76mm x 78a – Downhill Longboarding
Faster and more aggressively grippy than its little brother, the 76mm Cannibal is the number one choice of our race team. Whether you’re raging a big-ass mountain pass or going deep at a world cup race, the 76mm Cannibal has you covered when you need speed, grip, predictability, and slow-down power.
Made in USA
Venom – Bushings – Eliminator (HPF)
$16.99CADVenom – Bushings – Eliminator (HPF)
This bushing is our way of paying homage to what is, if we’re honest, one of the greatest bushings of all time: The Tracker Stimulator. The stepped out design lets you put a lot more urethane under your feet. The result of this, is you can run a softer duro and still maintain the same stability. In short, more turn, less wob, and more rebound from all the extra bushing. The Eliminator is also specifically designed to accommodate precision trucks with spherical bearings. One side of the bushing has an indented “dish” to prevent contact with the bearing that causes twitch.
Made In USA
HPF Formula:
78A – Blue
81A – Orange
85A – Yellow
87A – Purple
90A – Red
93A – Green
95A – Glow in the Dark
97A – Pink
Venom – Bushings – Caliber Plug Downhill Barrels (HPF)
$16.99CADVenom – Bushings – Caliber Plug Downhill Barrels (HPF)
The new Venom Plug Barrel Bushings for Caliber Trucks are designed to remove lateral play from the truck by filling the gaps between the hanger and the kingpin. This results in a quicker return to center, increased responsiveness, and a more direct turning feel over a traditional barrel bushing.
Each pack comes with 1 Plug Barrel Bushing and a regular Barrel in the same durometer.
Made In USA
HPF Formula:
85A – Yellow
87A – Purple
90A – Red
93A – Green
95A – Glow in the Dark
Venom – Bushings – Barrical Freeride (HPF)
$16.99CADVenom – Bushings – Barrical Freeride (HPF)
More stable than a barrel and less restrictive than an Eliminator, the Venom freeride bushing has a wide, stepped design that can be flipped for different turning response. For extra stability and a more defined center, put the wide end toward the hangar. For deep turning and juicy rebound, run the narrower end in the hangar. Either way, it’s ideal for going fast and doing big slides.
Made In USA
HPF Formula:
78A – Blue
81A – Orange
85A – Yellow
87A – Purple
90A – Red
93A – Green
95A – Glow in the Dark
97A – PinkDIMENSIONS:
Height: ~15.50mm
Step Diameter (into bushing seat): ~25.30mm
Max Diameter (out of bushing seat): ~30mm
Inner Diameter: ~9.50mm
Venom Wheels – Mach 1 Cannibal – 76mm x 74a
$117.99CADVenom Wheels – Mach 1 Cannibal – 76mm x 74a – Downhill Longboarding
Specs:
– Diameter: 76mm
– Width: 60mm
– Cobra Core
– Alignment: Slightly offset
– Durometer: 74a Mach 1Cobra Core Features
-Fiberglass Reinforced
-12x Stiffer
-39mm Tall 43mm Wide
-No Flex Zone (Patent Pending)
-Many Swags
Venom – HITP Hard In The Paint Harlot – 71mm x 80a
$94.99CADVenom – HITP Hard In The Paint Harlot – 71mm x 80a
Specs:
– Diameter: 71mm
– Width: 32mm
– Cobra Core
– Alignment: Offset
– Durometer: 80a HITPCobra Core Features
-Fiberglass Reinforced
-12x Stiffer
-39mm Tall 43mm Wide
-No Flex Zone (Patent Pending)
-Many Swags
Venom – HITP Hard In The Paint Cannibal – 72mm x 80a
$102.99CADVenom – HITP Hard In The Paint Cannibal – 72mm x 80a
Specs:
– Diameter: 72mm
– Width: 60mm
– Cobra Core
– Alignment: Slightly offset
– Durometer: 80a HITPCobra Core Features
-Fiberglass Reinforced
-12x Stiffer
-39mm Tall 43mm Wide
-No Flex Zone (Patent Pending)
-Many Swags
Venom – HITP Hard In The Paint Magnum – 78mm x 80a
$119.99CADVenom – HITP Hard In The Paint Magnum – 78mm x 80a
– Diameter: 78mm
– Width: 70mm
– Cobra Core
– Alignment: Slightly offset
– Durometer: 80a HITPCobra Core Features
-Fiberglass Reinforced
-12x Stiffer
-39mm Tall 43mm Wide
-No Flex Zone (Patent Pending)
-Many Swags
Venom – Bushings – Tall Kegs (HPF)
$18.99CADVenom – Bushings – Tall Kegs (HPF)
The “keg” bushing is designed to give more progressive resistance and rebound than a barrel, but without the hard stop of a normal stepped bushing. The curved side profile provides extra meat while still fitting most bushing seats. Ideal for use on the board-side, especially if you’re looking for a softer-feeling setup without losing stability. Just think of it as a barrel, but with that thicky-thicc-thicc as Nelly would say. Only compatible with Tall-bushing trucks.
Made In USA
HPF Formula:
78A – Blue
81A – Orange
85A – Yellow
87A – Purple
90A – Red
93A – Green
95A – Glow in the Dark
97A – PinkDIMENSIONS:
Height: ~18.70mm
Step Diameter (into bushing seat): ~25.10mm
Max Diameter (out of bushing seat): ~31.40mm
Inner Diameter: ~9.50mm
Venom – Bushings – Barrels (HPF)
$14.99CADVenom – Bushings – Barrels (HPF)
Plain and simple, the Downhill Double-Barrel Pack is built for speed. Double barrels, teamed with cup washers can give your setup that fully locked in feel that gives you the confidence you need to grab some serious velocity. Barrels: .6″ tall x .97″ wide
Made In USA
HPF Formula:
73A – Light Pink
78A – Blue
81A – Orange
85A – Yellow
87A – Purple
90A – Red
93A – Green
95A – Glow in the Dark
97A – PinkVenom – Bushings – Tall Barrel (HPF)
$16.99CADYet, another addition to the Venom family, this taller Venom barrel bushing has been designed to fit tall-bushing-compatible trucks like Rogues, Ronins, Bear Kodiaks, Arsenal, etc. Them same tried and true Venom barrel shape you all know and love, just scaled up for maximum stability and dive. Try them out and enjoy!
Made In USA
HPF Formula:
73A – Light Pink
78A – Blue
81A – Orange
85A – Yellow
87A – Purple
90A – Red
93A – Green
95A – Glow in the Dark
97A – Pink
Rogue Trucks – Cast Matte Black – 160mm 48°
$89.99CADRogue Trucks – Cast Matte Black – 160mm 48°
Introducing the new Cast 160mm 48° reverse trucks, the next-generation of cast truck from Rogue.
Full Set Includes
160mm Rogue Cast Hangers
48° Front Baseplate
48° Rear BaseplateUrethane:
4x Venom 90a Tall .75″ Bushings
2x Venom 90a Insert Bushings- On Sale
Pantheon – Andy Atchison Pro Model – Deck
$259.99$209.99CADPantheon Longboards – Andy Atchison Pro Model – Tortuga Deck
The Andy Atch Pro Model is here! If you remember the “Summit Series Tortuga,” consider this a more affordable but every bit as capable version of the same board. While many downhill racers are throwing torque blocks on their boards, the Andy Atch Pro sets you up with this excellent tucking mechanism within the design of the board.
SPECS
Length: 32″
Width: 8.5″ front bolts, 8.25″ back bolts, 9.125″ max width
Wheelbase: 20″ – 23″
