- No products in the cart.
Can’t visit us locally?
Check out our online store!
Check out what’s On Sale!
Sector 9 – Rally Junior Slide Gloves – Yellow
$54.99$39.99CADSPECIFICATIONS
– 50% Synthetic Leather
– 10% Polyester/ 10% Neoprene/ 15% Spandex/ 15% Other
– Delrin Finger and Palm Pucks
– 3mm Anti-vibration foam on palm
– High Density Grip Print on Fingers/Thumb
– Terry moisture wicking panel
– Velcro Closure- On Sale
Arbor – Bogart Micron – Complete
$199.99$159.99CADArbor Skateboards – Bogart Micron – Complete Cruiser
Bogart Micron: L: 23.75″ | W: 6.75″ | WB: 14.00″
This new collection from Arbor boasts three new micro shapes that were specifically designed to blend performance, portability, and sustainability. Inspired by 70’s surfboard design, the new shapes have a retro vibe, while delivering modern cruiser performance!
As skateboarding continues to move away from plastic, these zippy little gems are made, as always, with sustainably sourced wood for a fun, nimble, socially responsible ride.
- On Sale
Khiro – Tall Cone – Bushings
$9.99$4.99CADKhiro Bushings – Tall Cone Skateboard Bushing Pair (for one truck)
The Tall Cone Bushings are produced out of the same top grade urethane with familiar duros and colors the Khiro line is known for. Taller cone design made to fit trucks such as Randal, Paris and more. For best fit, check the measurements of your existing truck bushings and decide accordingly.
Dimensions:
small cone height = .510″
large cone height = .650″Original Durometers (Limited Stock):
White X-Soft (73a)
Orange (79a)
Blue Soft (85a)
Red Med-Soft (90a)
Yellow Med-Hard (92a)
Black Hard (95a)
Purple (98a)Sold in set of two bushings – (top and bottom) enough for one truck.
- On Sale
Bones – Super Reds Ceramic – Bearings
$134.99$99.99CADBones Bearings – Super Reds Ceramic – Bearings
Features
Features grade 5, silicone nitride, hot isostatically pressed ceramic balls.
Higher quality steel races and a superior surface finish.
Single non-contact removable rubber shield for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream racing lubricant.
Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible.Contents
Set of 8 bearings
Instructions
Sticker Sector 9 – Rally Junior Slide Gloves – Blue
$54.99$39.99CADSPECIFICATIONS
– 50% Synthetic Leather
– 10% Polyester/ 10% Neoprene/ 15% Spandex/ 15% Other
– Delrin Finger and Palm Pucks
– 3mm Anti-vibration foam on palm
– High Density Grip Print on Fingers/Thumb
– Terry moisture wicking panel
– Velcro Closure
- On Sale
Sector 9 – Wavepark Party 30.25 – Complete
$224.99$189.99CADSector 9 Skateboards – Wavepark Party 30.25 – Complete SurfSkate
RIDING STYLE
Cruiser
Carving +DIMENSIONS
Length: 30.25”
Width: 8.75”
Wheelbase: 12.875”COMPONENTS
9.0” Gullwing Sidewinder II Trucks
58mm 78a Nineballs
ABEC 5 Greaseball Bearings
0.25” Recycled Plastic Risers
1.25” Hardened Steel Bolts
Custom Screened Grip TapeFEATURES
Super Sap® Environmentally Friendly Resin
7 Ply Maple
Raised Texture Print Under Bottom Graphic
Printed Grip Tape
Kicktail
Art by Josh Smith Sector 9 – Rally Junior Slide Gloves – Yellow
$54.99$39.99CADSPECIFICATIONS
– 50% Synthetic Leather
– 10% Polyester/ 10% Neoprene/ 15% Spandex/ 15% Other
– Delrin Finger and Palm Pucks
– 3mm Anti-vibration foam on palm
– High Density Grip Print on Fingers/Thumb
– Terry moisture wicking panel
– Velcro Closure- On Sale
Bones – Super Reds Ceramic – Bearings
$134.99$99.99CADBones Bearings – Super Reds Ceramic – Bearings
Features
Features grade 5, silicone nitride, hot isostatically pressed ceramic balls.
Higher quality steel races and a superior surface finish.
Single non-contact removable rubber shield for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream racing lubricant.
Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible.Contents
Set of 8 bearings
Instructions
Sticker - On Sale
Arbor – Bogart Micron – Complete
$199.99$159.99CADArbor Skateboards – Bogart Micron – Complete Cruiser
Bogart Micron: L: 23.75″ | W: 6.75″ | WB: 14.00″
This new collection from Arbor boasts three new micro shapes that were specifically designed to blend performance, portability, and sustainability. Inspired by 70’s surfboard design, the new shapes have a retro vibe, while delivering modern cruiser performance!
As skateboarding continues to move away from plastic, these zippy little gems are made, as always, with sustainably sourced wood for a fun, nimble, socially responsible ride.
- On Sale
Pantheon – Andy Atchison Pro Model – Deck
$259.99$199.99CADPantheon Longboards – Andy Atchison Pro Model – Tortuga Deck
The Andy Atch Pro Model is here! If you remember the “Summit Series Tortuga,” consider this a more affordable but every bit as capable version of the same board. While many downhill racers are throwing torque blocks on their boards, the Andy Atch Pro sets you up with this excellent tucking mechanism within the design of the board.
SPECS
Length: 32″
Width: 8.5″ front bolts, 8.25″ back bolts, 9.125″ max width
Wheelbase: 20″ – 23″ - On Sale
Khiro – Tall Cone – Bushings
$9.99$4.99CADKhiro Bushings – Tall Cone Skateboard Bushing Pair (for one truck)
The Tall Cone Bushings are produced out of the same top grade urethane with familiar duros and colors the Khiro line is known for. Taller cone design made to fit trucks such as Randal, Paris and more. For best fit, check the measurements of your existing truck bushings and decide accordingly.
Dimensions:
small cone height = .510″
large cone height = .650″Original Durometers (Limited Stock):
White X-Soft (73a)
Orange (79a)
Blue Soft (85a)
Red Med-Soft (90a)
Yellow Med-Hard (92a)
Black Hard (95a)
Purple (98a)Sold in set of two bushings – (top and bottom) enough for one truck.
- On Sale
88 Wheel Co – Gummies Barrel Bushings Belligerent Blackberry Hard – 95A
$13.99$9.99CAD88 Wheel Co – Gummies Barrel Bushings Belligerent Blackberry Hard – 95A
Sold in packs of two so you can mix and match durometer for your perfectly tuned setup. Comes with 2 flat washers.
Diameter – 25mm
Height – 15mm
Durometer – 95A Super High Rebound
Weight – 27.4g / 0.97oz - On Sale
Arbor – Daniel Macdonald Pro Downhill – Deck
$224.99$189.99CADArbor Skateboard – Daniel Macdonald Pro Downhill – Deck
Classic downhill shape with modern construction celebrating the unique intersection of speed, style, and environment that is downhill skateboarding.
Length: 38.25″
Width: 9.75″
Wheelbase: 25.5 – 27.5″MATERIALS & COMPONENTS
Rocker and Microdrop
Kicktail
Flush Mounts
Wheel Wells
Multiple Wheelbase Options
Canadian Maple / Triaxial Fiberglass
Wood material comes from sustainable sources of supply Sector 9 – Rally Junior Slide Gloves – Blue
$54.99$39.99CADSPECIFICATIONS
– 50% Synthetic Leather
– 10% Polyester/ 10% Neoprene/ 15% Spandex/ 15% Other
– Delrin Finger and Palm Pucks
– 3mm Anti-vibration foam on palm
– High Density Grip Print on Fingers/Thumb
– Terry moisture wicking panel
– Velcro Closure
See our full selection of products.
Enter our online store!
#walkingisforchumps
