- No products in the cart.
Search results: “bear” – Page 2
Riptide – Bear Grizzly 5.01+/Precision Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96aRiptide – Polar Bear Pivot Cups – 96a
$16.99CADSold as Pair.
– Specifically designed for each truck
– Lively & Responsive
– Hand-poured into Custom-made molds, then the cup end is machined to fit the truck’s base plate perfectly
– No machining imperfections and no heat-affected zone in the super smooth pivot contact area
– RipTide’s exclusive Internally Lubricated WFB Urethane in 96a
Bronson Speed Co. – G3 Bearings
$35.99CADNext Generation Bearings, Designed for Today’s Skateboarding G3’s
• Deep Groove Raceways- balls roll deep in raceway channels – reduces side impact damage & breakage
• Straight Edge Frictionless Shields- pop off resistant – holds oil in, dirt and moisture out- easy to clean
• Micro Groove Raceway Surfaces- linear micro-groove surfaces improve bearing lubrication, speed and spin
• Max Impact Cage Design- non- distortion custom cage keeps the balls precision spaced & oil circulating
• Balls Out Technology- eliminates shield and cage contact on impact for a go fast, stay fast bearing
• High Speed Ceramic Oil- nano-ceramic compounds for wear protection – moisture, rust, corrosion resistant
• Factory Fresh Quality- nitrogen filled shrink wrap, reduces metal & oil oxidation until ready to be ridden
Bones Race Reds Bearings
$49.99CADPrecision ground, Skate Rated™ Racing bearings by Bones®
Removable high-speed Nylon™ ball retainers
Removable Non-Contact frictionless shield for easy cleaning
Integrated bearing spacer to provide perfect 0.400″ spacing
Extended race replaces need for spacers and washers
Extended race provides perfect alignment for greater speed and axle reinforcement
Fewer parts mean faster set up
Bones Super Reds Ceramic Bearings
$119.99CADFeatures
Features grade 5, silicone nitride, hot isostatically pressed ceramic balls.
Higher quality steel races and a superior surface finish.
Single non-contact removable rubber shield for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream racing lubricant.
Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible.Contents
Set of 8 bearings
Instructions
Sticker
Bones Super Reds Bearings
$37.99CADFeatures
Features Higher quality steel races, better quality and grade balls, and a superior surface finish.
Single, non-contact, removable rubber shield for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream™ racing lubricant
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.Contents
Set of 8 bearings
Instructions
Sticker
Bones Swiss Bearings
$89.99CADFeatures
Single, removable, non-contact rubber shield allows easy cleaning and low friction.
High speed nylon ball retainer provides added strength and speed.
Pre-lubricated with Speed Cream racing lubricant
Skate Rated; clearances, tolerances, materials and lubricant provide the best performance and durability possible.
Best selling high end skate bearing in the U.S.A.Contents
Set of 8 bearings
4 bearing spacers
Instructions
Sticker
Bones Swiss Ceramic Bearings
$199.99CADFeatures
Accelerate faster.
Roll faster and farther.
Resist dirt and moisture better.
Help to repair injuries to your races caused by dirt.
1 non-contact, removable rubber shields allow easy cleaning.
High speed nylon ball retainer for greater strength and speed.
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.Contents
Set of 8 bearings
4 bearing spacers
Instructions
Sticker
Bones Super Swiss 6 Ball Bearings
$94.99CADFeatures
Single, non-contact, removable rubber shield allows for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream® racing lubricant
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.Contents
Set of 8 bearings
4 bearing spacers
Instructions
Sticker
Bones Reds Bearings
$24.99CADSingle, non-contact, removable rubber shield for easy cleaning and less friction
High speed Nylon™ ball retainer for greater strength and speed
Pre-lubricated with Speed Cream™ racing lubricant
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible
Zealous – Ceramic Bearings
$39.99CADZealous downhill Ceramic precision Spaced longboard Bearings
Ceramic Balls
-Ceramic balls are lighter, stiffer, smoother and naturally corrosion resistant. This means we can use a lower viscosity lubricant which makes them fast right out of the tube.
– Precision 8mm axle holes
– .4045″ built in spacers
– .5mm built in speedrings
– Strengthened Nylon Ball Retainers
– White rubber seals to keep dirt and debris on the outside of the bearing.
– Lubed with Custom Nanoceramic Grease
-The unique feature of our lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.
-The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.
-Corrosion on the inside of the bearing is nearly eliminated.Sold in sets of 8 bearings.
Zealous Bearings – Classic
$19.99CADFeature:
– Steel Balls
– Precision 8mm axle holes
– .4045″ built in spacers
– .5mm built in speedrings
– Green rubber seals to keep dirt and debris on the outside of the bearing.
– Lubed with Custom Nanoceramic Grease
-The unique feature of the lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.
-The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.
-Extremely low water washout
-Corrosion on the inside of the bearing is nearly eliminated.Sold in sets of 8 bearings.
