Search results: “ronin”
- You cannot add "Moonshine - Pro Tucker - Complete" to the cart because the product is out of stock.
Seismic – Defcon Standard .60 Short Barrel – Bushings
$15.99CADSeismic Skate – Defcon Standard Short Barrel 0.60-inch (15mm) – Bushings
Seismic® Defcon™ Barrel Bushings
Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
Available in five (5) color-coded durometers and three (3) precision-fit heights. (Additional duros coming early 2023.)
Price is for a single pair of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.A major step forward in bushing performance…
• Deeper lean and truer, more fluid steering with less lateral hanger slop!
• Highly-energetic yet smooth and controlled return-to-center
• Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
• Smoother, more linear resistance profile – Consistent feel • Advanced controlFine-tuned dimensions for high-performance fit!
• Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
• Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
• Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
• Short 0.60-inch (15mm): Optimal height both Board-Side (BS) and Road-Side (RS) for many modern longboard trucks, especially those assembled with BS washers. (e.g., Bear, Caliber, Paris, Dont Trip Poppy / Slalocybin)73A – Cloud White
77A – Sunray
81A – Sky Blue
84A – Bubblegum
87A – Mango
90A – Mint
93A – Grape
97A – MidnightNote: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.
Seismic – Defcon Standard .60 Short Barrel Bushings – Bundle Pack
$69.99CADSeismic Skate – Defcon Standard Tall Barrel 0.75-inch (19mm) Bushings – Bundle Pack
Seismic® Defcon™ Barrel Bushings
Deeper Lean with Truer, More Fluid Steering • Finer Control and Highly-Energetic Response • Precision Fit
Available in five (5) color-coded durometers and three (3) precision-fit heights. (Additional duros coming early 2023.)
Price is for a bundle pack of five (5) pairs of two (2) barrel bushings. Discounted pricing for Bundle of all duros in a single height.A major step forward in bushing performance…
• Deeper lean and truer, more fluid steering with less lateral hanger slop!
• Highly-energetic yet smooth and controlled return-to-center
• Larger compression range compared to other bushing formulas in the same duro – No premature packing • Fuller wheel contact (less “outside wheel lift”)
• Smoother, more linear resistance profile – Consistent feel • Advanced controlFine-tuned dimensions for high-performance fit!
• Full 1.0-inch Outer Diameter optimizes seating in finer Hanger bushing pockets.
• Inner Diameter carefully calibrated for snug fit on standard Kingpin shafts.
• Mold-top ends machined for exact height and superior flatness. – No “dished” end surfaces.
• Short 0.60-inch (15mm): Optimal height both Board-Side (BS) and Road-Side (RS) for many modern longboard trucks, especially those assembled with BS washers. (e.g., Bear, Caliber, Paris, Dont Trip Poppy / Slalocybin)Includes:
81A – Sky Blue
84A – Bubblegum
87A – Mango
90A – Mint
93A – GrapeNote: May feel slightly softer than comparable duros in other bushings. For optimal bushing performance, do not under-tighten or over-tighten kingpin nuts. Replace bushings that show signs of excessive wear, weathering, or aging.
Powell Peralta – Supreme Crown – Patch
$7.99CADPowell Peralta – Supreme Crown – Patch
Originally Released: 1991
Artwork by: Craig StecykAbout Powell Peralta Patches:
Powell Peralta embroidered patch
2.5″ diameter
iron-on backingDenim and cotton material provide the best base. Be careful of polyester.
Put the item on a hard surface, like an ironing board. Iron it to create a nice, flat surface.
Place the patch where you want it to be.
Heat up the iron to it’s hottest setting.
Place a thin cloth over the patch. (This will protect the patch and any surrounding material).
Place the iron over the patch and press down hard as possible for 15-30 seconds.
Remove the iron and let patch cool.
Check the patch by gently rubbing at the edge, trying to lift it. If it lifts, replace the thin material and iron again for 10- 15 seconds.
To ensure a secure patch you can also sew around the edges.Orangatang – Moose Knuckles Bushings
$21.99CADJUICIER BOUNCE, TIGHTER PACKAGE.
Crafted for quick turning response and smooth edge-to-edge transitions, Orangatang Knuckles are the ultimate high-energy bushing upgrade for carving, pumping, dancing, and freestyle longboarding.Orange = Soft
Purple = MediumWhat’s in the box? Pack contains two insert barrel bushings, two gumdrop bushings, two large cup washers, and two small cup washers.
LONGBOARD BUSHING SPECS
Diameter: 0.95” (24.1 mm)
Height (gumdrop): 0.64” (16.3 mm)
Height (inset barrel) 0.59” (15 mm) barrel + 0.075” (1.91 mm) insert = 0.665” (16.9 mm) total
Formula: Randy Thane
Durometers: soft (orange, 87a), medium (purple, 90a)RECOMMENDED WEIGHT RANGES
Soft: 65-190+ lbs / 29-86+ kg
Medium: 130-230+ lbs / 59-104+ kgVenom – Bushings – Tall Barrel (HPF)
$14.99CADYet, another addition to the Venom family, this taller Venom barrel bushing has been designed to fit tall-bushing-compatible trucks like Rogues, Ronins, Bear Kodiaks, Arsenal, etc. Them same tried and true Venom barrel shape you all know and love, just scaled up for maximum stability and dive. Try them out and enjoy!
Made In USA
HPF Formula:
73A – Light Pink
78A – Blue
81A – Orange
85A – Yellow
87A – Purple
90A – Red
93A – Green
95A – Glow in the Dark
97A – Pink